Installing Rack Mount Kit; Expansion Slot For Wireless Microphone - Phonic POWERPOD 885 PLUS User Manual

INSTALLING RACK MOUNT KIT

An optinoal rack mount kit ER-PLUS can easily be added to your Powerpod Molded Powered Mixer, allowing it to be
installed into a standard 19" rack. To do so, the handles of the Molded Mixer should first be removed, as indicated in
the pictures below.
After removing the Powerpod Molded Powered Mixers' handles, attach the rack mounting kit parallel to either side of
the mixer face using the screws provided along with the optional kit. Ensure the kit is firmly attacked before attempting
to attach the Powerpod Mixer to a rack.
After attaching the Powerpod Molded Powered Mixer to your audio rack, you may then set up all your inputs and
outputs as may be necessary. The Powerpod Molded Mixer will take up 7 standard units of rack space.

EXPANSION SLOT FOR WIRELESS MICROPHONE

page 6
POWERPOD 745 / 865 / 885 User's Manual
You may have noticed a small door on the side of your
Powerpod Molded Mixer, which, inside, has a small
expansion slot. Do not panic! This is for the addition of
a wireless microphone module (either the UM11, VM11,
UM22 or VM22, not included with this mixer). By simply
inserting your wireless mic module into the expansion
slot, and screwing it into place, you can then use wireless
microphones along with your Powerpod Molded Mixer. The
signal of the wireless microphone is defaultly routed to the
channel 1 input.
PHONIC