Table of Contents
Advertisement
"AUDIO" menu
SETTING STATE
Display the current setting of the items below
PCM OUTPUT
UP TO 48kHz: When connected to equipment compatible
Check the digital
input limitations of the
UP TO 96kHz: When connected to equipment compatible
equipment you connect
using COAXIAL terminal
•
Signals from copy-protected discs are converted to 48 or 44.1 kHz.
and select the maximum
•
Some equipment cannot handle sampling frequencies
sampling frequency of
of 88.2 kHz, even if they can handle 96 kHz. Read your
PCM digital output.
equipment's operating instructions for details.
DOLBY DIGITAL
BITSTREAM
PCM
With COAXIAL or HDMI
AV OUT connections
( page 7 and 8)
DTS
BITSTREAM
With COAXIAL or HDMI
PCM
AV OUT connections
( page 7 and 8)
MPEG
BITSTREAM
With COAXIAL or HDMI
PCM
AV OUT connections
( page 7 and 8)
DYNAMIC RANGE
ON: Adjusts for clarity even when the volume is low
through compressing the range of the lowest sound
level and the highest sound level. Convenient for late
night viewing. (Only works with Dolby Digital.)
OFF
When audio is output from HDMI AV OUT terminal, and the connected equipment does not support
the item selected, the actual output will depend on the performance of this connected equipment.
"DISPLAY" menu
SETTING STATE
Display the current setting of the items below
LANGUAGE
ENGLISH
ITALIANO SVENSKA
"HDMI" menu
SETTING STATE
Display the current setting of the items below
VIDEO PRIORITY
ON: When connected through the HDMI AV OUT terminal.
Video is output from the HDMI terminal. Video is also
output from the COMPONENT VIDEO OUT terminal,
but only in 480i (interlace).
OFF: When connected through the COMPONENT
VIDEO OUT terminal. Video is output from the
COMPONENT VIDEO OUT terminal according to the
setting of "VIDEO OUT (I/P)" ( page 18, "VIDEO"
menu). Video is also output from the HDMI terminal.
RQTC0145-B.indd 19
with 44.1 or 48 kHz
with 88.2 or 96 kHz
Select "BITSTREAM" when the equipment
can decode the bitstream (digital form
of multi-channel data). Otherwise, select
"PCM". (If the bitstream is output to the
equipment without a decoder, high levels of
noise can be output and may damage your
speakers and hearing.)
FRANÇAIS ESPAÑOL
DEUTSCH
NEDERLANDS POLSKI
AUDIO OUT
ON: Audio output is from HDMI AV OUT terminal.
OFF: Audio output is not from HDMI AV OUT terminal.
RGB RANGE
STANDARD
ENHANCED: When the black and white images are not
distinct.
•
It only works when the COLOR SPACE
( page 17, On-Screen Menu 4) is set to RGB.
VIERA Link
ON: The VIERA Link "HDAVI Control
( page 24).
OFF
"OTHERS" menu
SETTING STATE
Display the current setting of the items below
REGISTRATION
SHOW CODE: You need this registration code to purchase
Displays the unit's
and play DivX Video-on-Demand (VOD) content
registration code.
( page 24, About DivX VOD contents).
JPEG TIME
To change the slideshow timing
1 SEC to 15 SEC (in 1 unit)
15 SEC to 60 SEC (in 5 unit)
60 SEC to 180 SEC (in 30 unit)
•
"3 SEC" is the factory preset.
FL DIMMER
BRIGHT
DIM
Changes the brightness
of the unit's display.
AUTO: The display is dimmed, but brightens only when you
perform some operations.
AUTO POWER OFF
ON: The unit switches to standby mode after about 30
minutes in the stop mode.
OFF
QUICK SETUP
SET: Display the QUICK SETUP settings
DEFAULTS
RESET
This returns all values in
The password screen is shown if "RATINGS" ( page 18)
the Setup menus to the
is set. Please enter the same password and press [ENTER],
default settings.
then turn the unit off and on again.
1
The original language designated on the disc is selected.
Input a code number referring to the table ( page 20).
2
If the language selected for "AUDIO" is not available, subtitles appear in that
3
language (If available on the disc).
TM
" function is available
19
2007-3-19 16:05:58
Hide quick links:
Advertisement
Table of Contents
