Panasonic Viera TX-P42U30B Operating Instructions Manual page 32

Menu Item
Preferred Subtitles
Input Labels
Banner Display
Timeout
Playing Time Display
Radio Mode
Network Setup
Shipping Condition
Owner ID
Common Interface
System Update
Software Licence
System Information
Power on Preference
Power on Channel
List
Auto Standby
Power Save
•
A different menu will be displayed in the mode of Media Player. (p. 51)
•
Only available items can be selected.
32
Adjustments / Configurations (alternatives)
Selects the preferred language for digital channel subtitles (depending on the
broadcaster) [English] / [Welsh] / [Gaelic] / [Irish]
To display subtitles (p. 17)
provides aids in understanding and enjoyment with DVB subtitles(depending on the
broadcaster).
Labels or skips each input terminal (p. 44)
Sets how long the Information banner (p. 15) stays on screen
[0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] / [7] / [8] / [9] / [10] (seconds)
Set to [On] to display a continuous record of time spent using Game mode every 30
minutes [Off] / [On]
•
This function is available when [Game] is selected in [Viewing Mode]
Sets the timer for turning off the screen automatically when a radio channel is selected
[Off] / [5] / [10] / [15] / [20] (seconds)
•
The sound is active even if the screen turns off.
•
Press any buttons except Standby, Volume Up / Down and Sound Mute buttons to
turn the screen on.
•
This function is effective in reducing power consumption when listening to a radio
channel.
Sets the network setting to use in your network environment (p. 45)
Resets all settings, for example, when moving house (p. 47)
Inputs the owner ID (p. 48)
Uses include to watch encrypted channels (p. 49)
Downloads new software to this TV (p. 50)
Displays the software licence information
Displays the system information of this TV
Automatically selects the input when the TV is turned on [TV] / [AV]
Set to [TV] to view picture from TV tuner.
Set to [AV] to view input from an external equipment connected to a SCART terminal,
e.g. satellite receiver.
•
The external equipment must be switched on and sending a control signal for
automatic switching at power on to occur.
Automatically selects All Channels or Favourites list in the Information banner (p. 15)
when the TV is turned on [All Channel List] / [Last]
Set to [All Channel List] to display all the channels.
Set to [Last] to display the one you selected last time.
•
Not available in Analogue mode
Sets the time the TV automatically goes to Standby mode when no operation is
performed for the selected times [Off] / [2] / [4] (hours)
•
Starting Timer Programming automatically does not affect this function.
•
Automatic input switching with the connected equipment affects this function and
time-count will be reset.
•
The notification message will appear 3 minutes before going to Standby mode.
Reduces brightness of picture to economise on power consumption [Off] / [On]
(p. 28)