Displays; Connections - Panasonic KX-TGA715FX Operating Instructions Manual

TGA715FX_717FX(e-e).book Page 8 Wednesday, February 28, 2007 2:47 PM
Preparation

Displays

Display icons
Display Meaning
icon
Within range of a base unit
w
L When flashing: Handset
is searching for base unit.
(out of range of base unit,
handset is not registered
to base unit, no power on
base unit)
Handset is accessing base
L
unit. (intercom, paging,
changing base unit
settings, etc.)
Handset is on an outside
k
call.
Answering system is on.
u
(page 19)
Battery strength
5
Handset number (Standby
[2]
display setting, page 16)
New voice mail message
0
*2
received
L Line is being used by
another handset.
L Answering system is
being used by another
handset or the base
*1
unit.
*1 For KX-TG7120/KX-TG8120/KX-
TG9120 users only
*2 Voice mail users only
8

Connections

Connect the AC adaptor to the charger and
route the cable as shown. The charger can
be mounted on the wall, if required.
Hooks
25 mm
Screws
Use only the included AC adaptor.
Note:
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
*1
feel warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
Location
L For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
TVs, radios, personal computers or
other phones.
– in a convenient, high and central
location.
(220 – 240 V,
50 Hz)