Panasonic Viera TH-L42U30S Operating Instructions Manual page 62

[Speaker Selection]
You can control the theatre speaker with this TV remote control by pointing at the TV's signal receiver.
•
If you cannot operate, check the settings and the equipment
"Summary of features", "Connection", "Preparations" (p. 58 - 59)
Access and control the speaker volume
MUTE
VOL
TV
Note
•
These functions may not work properly depending on the connected equipment.
•
Image or sound may not be available for the first few seconds when the Input mode is switched.
•
Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or
Amplifier. Read the manual of the equipment.
•
"HDAVI Control 5" is the newest standard (current as of December, 2010) for HDAVI Control
compatible equipment. This standard is compatible with conventional HDAVI equipment.
•
To confirm this TV's version of HDAVI Control
62
- Speaker control
1
Display [VIERA Link Menu]
2
Select [Speaker Selection]
VIERA Link Menu
Start
Pause Live TV
Direct TV Rec Start
VIERA Link Control Recorder
Speaker Selection Home Cinema
3
Set to [Home Cinema] or [TV]
set
[Home Cinema]
Player theatre, Blu-ray Disc theatre or Amplifier will be automatically
turned on if it is in Standby mode and the sound is from theatre speakers
connected to the equipment.
•
Volume up / down
•
Mute
•
The sound of TV speakers is mute.
•
When the equipment is turned off, TV speakers will be active.
[TV]
TV speakers are active.
Multi-channel sound
•
If you wish to enjoy multi-channel sound (e.g. Dolby Digital 5.1ch) via an
Amplifier, connect with HDMI cable and Optical digital audio cable (p. 58),
and then select [Home Cinema]. If your Amplifier has "HDAVI Control 5"
function, you can connect only with HDMI cable. In this case, connect your
Amplifier to the TV's HDMI2 terminal.
To enjoy the sound from the DIGA Recorder in multi-channel sound,
connect an HDMI cable from the DIGA Recorder to the Amplifier (p. 58).
select
VOL
[System Information] (p. 30)