Wired Network Setup - Philips HMP7001 User Manual

Wired network setup

What you need
A wired router that is connected to the Internet and an ethernet cable
Use Auto IP address settings
1
Press .
2
Select [Setup] and press OK.
» The setup menu is displayed.
3
Select [Network] > [Ethernet] > [DHCP IP (AUTO)] > [DHCP (AUTO)] and press OK.
» A dialog box is displayed.
4
Select [Yes] and press OK to save the network settings.
» A connection test is started.
» The status of network connection is displayed after the test is completed. .
5
Press OK to exit.
Note
•
If the Dynamic Host Configuration Protocol (DHCP) is unavailable or disabled on the router, manually enter the IP address of
the player.
Enter IP addresses manually
You can set the IP address manually.
1
Select [Network] >[Ethernet] > [FIX IP (MANUAL)].
» The IP address table is displayed.
2
Press to select a item and press
3
Press OK when you complete setting the IP address.
» A dialog box is displayed.
4
Select [Yes] and press OK to save the network settings.
to adjust the value.
EN
19