Table of Contents
Advertisement
3.
Subsequently switch the password lock on in the menu item PASSWORD.
The age release class is now set and can be changed only if the password
lock is previously switched off.
DEFAULT
Select the menu item DEFAULT and confirm with the
DVD mode settings to the factory default settings.
EXIT SETUP
Select this menu item to exit the Setup menu.
LANGUAGE SETUP menu
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
In this menu you can set the language settings for menus and subtitles.
OSD LANGUAGE
Here you set the language, in which the OSD Menu will be shown on the display.
AUDIO LANG
Set the audio language here, which should be used as standard when playing
back the film.
SUBTITLE LANG
Set the subtitle language here, which should be used as standard when playing
back the film.
MENU LANG
Set the disc menu language here, which should be used as standard when playing
back the film.
EXIT SETUP
Select this menu item to exit the Setup menu.
VIDEO SETUP menu
In this menu you set the Brightness, Contrast, Hue and Saturation for disc
playback.
VIDEO SETUP
OK
button to reset the
BRIGHTNESS
With the help of the control buttons
• Subsequently press the
CONTRAST
With the help of the control buttons
• Subsequently press the
HUE
With the help of the control buttons
The further the controller is pushed up the warmer the entire image becomes.
On the other hand when pushed down the image radiates a cooler mood.
• Subsequently press the
SATURATION
With the help of the control buttons
• Subsequently press the
EXIT SETUP
Select this menu item to exit the Setup menu.
SPEAKER SETUP menu
In this menu you set the stereo output for the system's loud speaker.
SPEAKER SETUP
DOWNMIX
LT/RT:
STEREO:
EXIT SETUP
Select this menu item to exit the Setup menu.
- 11 -
BRIGHTNESS
CONTRAST
HUE
SATURATION
EXIT SETUP
OK
button to continue.
OK
button to continue.
OK
button to continue.
OK
button to continue.
DOWNMIX
EXIT SETUP
Select this setting if the film was recorded in Pro Logic Dolby
Digital and you want to hear the sound in cinema quality.
Select this option to output the left and right sound channels of the
DVD. The output with CD playback is a traditional stereo signal.
you can set the brightness.
you can set the contrast.
you can set the hue.
you can set the colour saturation.
Advertisement
Table of Contents
