Page 1
INSTRUCTION MANUAL Demolition Hammer HM0830 005813 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 national law, electric equipment that 8JD, ENGLAND have reached the end of their life must Responsible manufacturer: be collected separately and returned to Makita Corporation Anjo Aichi Japan environmentally compatible GEA001-3 recycling facility. ENE045-1...
adapter plugs with earthed (grounded) power 16. Do not force the power tool. Use the correct tools. Unmodified plugs and matching outlets will power tool for your application. The correct reduce risk of electric shock. power tool will do the job better and safer at the Avoid body contact with earthed or grounded rate for which it was designed.
FUNCTIONAL DESCRIPTION Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. Hold power tools by insulated gripping CAUTION: surfaces when performing an operation where Always be sure that the tool is switched off and • the cutting tool may contact hidden wiring or unplugged before adjusting or checking function on its own cord.
Installing or removing the bit Replacing carbon brushes 1. Tool retainer 1. Commutator 2. Push button 2. Insulating tip 3. Carbon brush 005816 001146 Press the push button and pivot the tool retainer to the When the resin insulating tip inside the carbon brush is side.
Page 6
Plastic carrying case Wipe out the old grease inside and replace with a fresh • grease (30 g). Use only Makita genuine hammer grease (optional accessory). Filling with more than the specified amount of grease (approx. 30 g) can cause faulty hammering action or tool failure.
Page 8
Makita Corporation Anjo, Aichi, Japan 884584-220...