Adjusting The Data Back - Pentax MZ-7 Operating Manual

ADJUSTING THE DATA (optional)
If you have purchased your camera as the DATE model version, or if
you have purchased the Data Back separately, the following section
applies.
Note:
Carefully press the button with the protrusion part of the camera's strap
clamp.
Do not press the buttons with an object having a sharp tip.
Adjusting the year/month/day
1. Press the DATE button repeatedly until the date is displayed.
2. Press the SELECT button to make the year, month or day you
want to change blink. The digits blink in the following order.
Year - Month - Day - Year
3. Change the date with the ADJUST button.
• The digit increases by one each time the ADJUST button is depressed.
Holding the button for about 2 to 3 seconds will change the digits con-
tinuously.
4. Press the SELECT button to stop the digit from blinking, after you
have changed the date. The adjusted date has been entered.
71