Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
There are some restrictions on placement for viewing 3D images. For details
Example 1
Connecting aerial
TV only
Rear of the TV
AC 220-240 V
50 / 60 Hz
Mains lead
Note
•
To watch 3D contents
(p. 29)
•
Connect to the TV's AV1 for a DVD Recorder / VCR supporting Q-Link (p. 82).
•
For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI
cable (p. 89).
•
Q-Link and VIERA Link connection
•
Please also read the manual of the equipment being connected.
•
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor. Otherwise,
distortion of image / sound may occur or operation of other equipment may be interfered.
TV, DVD Recorder / VCR and Player
Rear of the TV
Terrestrial aerial
Cable
AC 220-240 V
50 / 60 Hz
RF cable
RF OUT
(p. 80, 81)
(p. 29, 33)
Example 2
Connecting DVD Recorder /
VCR and Player
Mains lead
Fully wired
SCART cable
RF cable
DVD Recorder or
VCR
RF IN
Terrestrial aerial
Cable
Fully wired
HDMI
compliant
cable
Player /
3D-compatible
player
RF cable
11