Siemens CIELO 2 ACTIVE User Manual page 11

1
Charging
Plug the jack plug into the contact on the backside of the
charger and then plug the power supply with your country-
specific adapter into a power outlet. The middle LED indicates
that the charger is connected to the power supply. Open the
charger by pressing the front button. The lid will open.
The charger consists of two charging slots, which hold two
CIELO 2 Active hearing instruments, and a larger cavity, which
provides space for the attached receiver units with domes.
1 Charging slots with charging contacts.
2 Cavity for receiver units and domes.
3 LEDs indicate the functional states of the charger.
Each LED indicates the functional states of the corresponding
charging slot 3a / 3b.
When you place your CIELO 2 Active hearing instrument in one
of the charging slots and the lid is closed, the instrument is
switched off and the recharging process automatically initiated.
Charging is complete when the green LED stays on continuously.
The hearing instrument is turned off after you removed it from
the charger. Open and close the battery door to turn on the
hearing instrument.
3a
3
3a
2
3b
3
3
3b
11