Gsm Services - Mitsubishi Electric M320 User Manual

4
Select Auto-retry
choose On
5 Select Save
setting.
When activated, Retrying and a
countdown timer are displayed before
each new trial. An auto-retry warning
tone sounds each time a new call at-
tempt is made.
Selecting Exit
or pressing any key
during the retrial process cancels the
auto-retry process.
Auto Switch On/Off
This allows the phone to automatical-
ly switch on or off at pre-determined
times.
. Select Settings.
Press
1
Select Phone settings
2
3
Select Auto features
4 Auto-switch-on
Select
Auto-switch-off and select
On to activate the feature.
5
Enter the time you want your
mobile to switch on and/or to
switch off and press OK
6
Select Save
setting.
If the phone is already on at automatic
switch-on time it remains on.
When the phone is about to automat-
ically switch off a warning message
and a countdown timer are displayed.
Selecting Exit
cancels the switch
off process.
If the mobile is already off at switch-
off it remains off.
4
If a call is in progress at switch-off time, the switch-off
process is postponed until the call is ended.
- Remember to turn
Caution
off the Auto switch-on fea-
ture when boarding an air-
craft.
See the General safety warn-
ings.
and
.
to store your
.
.
or
.
to store your
Default settings
You can reset your phone and get
back your mobile default settings via
the Settings menu. This has no effect
on the phonebook entries or the
phone lock code.
. Select Settings.
1 Press
Select Phone settings
2
3
Select Default settings
The following features are reset:
Feature
Alert Tones
Melodies
Volumes,
Ring, Key,
Speech,
Alarm.
Backlight,
Contrast
Any Key,
Auto-Retry,
Auto An-
swer fea-
tures.
Ramping
Graphics
Themes

GSM Services

Diverting incoming calls
This Network dependent service al-
lows to divert incoming calls (voice,
fax or data calls) to another number
To divert a call:
Press . Select Settings.
1
Select GSM Services
2
3
Select Call diverting. The fol-
lowing sub-menu is displayed
(n.b.: this menu contents may
vary according to your service
provider).
.
Default setting
Ring
Mitsubishi + (line 1)
Mitsubishi + (line 2)
Mitsubishi + (Alarm)
Mid values
Mid value
Off
Off
Mitsubishi
.
35