Table of Contents
Advertisement
To set call cost type to units:
1
Press OK. Select
2
Call
costs.
Select
3
Select
Display cost
4
Select Units.
When the cost type is set to units, the credit limit and the remaining credit are shown in units.
SETTING THE CREDIT LIMIT
You may also be able to set a credit limit to your calls. When the credit limit is reached no more
chargeable outgoing or incoming call is allowed. You can however still make emergency calls.
The PIN2 code is needed to set the credit limit.
1
Press OK. Select
2
Select
Call
costs.
3
Credit
limit. The display shows the current set credit limit.
Select
4
Select Edit. Enter your PIN 2 code and press OK.
5
Enter the credit limit (use
When a credit limit is set the selection from the 'Credit limit' display is Edit or Set no limit.
SHOW COSTS
1
Press OK. Select
2
Call
costs.
Select
3
Select Show.
4
Use up and down arrow keys to display the
credits.
The remaining credit is shown in either units or currency as set by Cost Type menu above.
-
CALL COSTS
RESETTING ALL COSTS TO ZERO
To reset all call costs to zero:
1
Press OK. Select
2
Select
Call
costs.
3
Select Reset.
4
Select Yes.
5
Enter the PIN 2 number and press OK.
ALTERNATE LINE SERVICE
Some operators support the use of a second line. You may then have two mobile phone numbers
(e.g. a business line plus a personal line). To use them you need to select the line to be used.
1
Press OK. Select
2
Select
Line
selection.
The current line selection is displayed.
3
Use up and down arrow keys to scroll to the required line. Press
1. The Line selection sub-menu may not be available on your mobile. Please contact your service provider to get
further details on this service.
2. Line 1 and Line 2 can be named (Office and Home for instance). Refer to My number menu (see "my number(s)
display," page 47). Whichever line is selected to send calls, incoming calls can still be received on either line.
RECORDED CALL
This submenu allows to play the recorded phone calls. If several phone conversations were
recorded they are played one after another.
1
Select Calls&Times, select
In compliance with European regulations, you have to inform your correspondent before
recording a phone conversation.
Calls &
Times.
type.
(
SUBSCRIPTION DEPENDENT
Calls &
Times.
to type a decimal point for currencies). Press
Calls &
Times.
Calls &
Times.
-
2 (
SELECTING LINE
SUBSCRIPTION DEPENDENT
Calls &
Times.
Recorded call.
42-
)
Last Call
All Calls
and
OK
Calls & Times
OK
to validate.
Remaining
or show the
)
to validate.
Advertisement
Table of Contents
