Table of Contents
Advertisement
When enabled, Auto Redial will automatically redial a call. There will be
a delay and a tone will be heard before Auto Redial.
Press
1
Select 4 Auto Redial.
2
Select Enable or Disable and press OK softkey.
3
When enabled, Any Key Answer allows you to answer a call by pressing
any key except Mute softkey, End/Back key, and Mode key.
Press
1
Select 5 Any Key Answer.
2
Select Enable or Disable and press OK softkey.
3
If your network supports the Voice Privacy feature, your call will be
encrypted so that no one can access your call. Your phone always
attempts to use privacy mode. If your service provider's system does not
support this feature, or if the phone is on an analog channel, Voice
Privacy Off! displays and a warning tone sounds. You can turn this
warning tone on or off.
To enable/disable Privacy Tone,
Press
1
Select 6 Privacy Tone.
2
Select Enable or Disable and press OK softkey.
3
To enable/disable Send Caller ID,
Press
1
Select 7 Send Caller ID.
2
Select 2 Send (Normal). If Block Caller ID Code needs to be
3
changed, press Setup softkey. Enter Block Caller ID Code
and press OK left softkey.
To disable, press 1 Don't Send and press OK softkey.
4
and select 4 Preferences, 2 Call Setup.
and select 4 Preferences, 2 Call Setup.
and select 4 Preferences, 2 Call Setup.
and select 4 Preferences, 2 Call Setup.
Default setting = Disable
Default setting = Enable
Default setting = Disable
Default setting = Send (Normal)
45
Advertisement
Table of Contents
