Panasonic Viera TX-32LX700F Operating Instructions Manual page 11

How to Use Menu Functions
■
Menu list
Menu Item
Controls the connected Panasonic equipment
VIERA Link Control
"Easy control only with VIERA remote control" (p. 33)
"Speaker control" (p. 33)
•
You can also access VIERA Link Menu directly using the VIERA Link button on the
Speaker Selection
remote control.
•
Basic picture mode (Dynamic / Normal / Cinema / Auto)
Viewing Mode
Set for each input signal
Contrast, Brightness,
Adjusts colour, brightness, etc. for each picture mode to suit your taste
Colour, Sharpness
• Adjusts tint of image
Tint
For NTSC signal reception only
Colour Balance Chooses the colour balance of the entire image (Cool / Normal / Warm)
Automatically adjusts colours to vivid ones (Off / On)
•
Colour Management
Not valid on PC signal
Picture Noise Reduction
P-NR Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto) •
Not valid on HDMI or PC signal
Automatically reduces noise for watching DTV, DVD, VCD and SD Card
MPEG NR
(Off / Min / Mid / Max)
Automatically makes still pictures and slow pictures look more vivid (Off / On)
•
3D-COMB For PAL or NTSC signal reception only
•
Not valid on RGB, S-Video, components, PC, HDMI and SD Card
Reset to Default Press the OK button to reset the present Picture Mode to the default settings
Mode Basic sound mode (Music / Speech)
Bass Adjusts the output level of deep bass
Treble Adjusts the output level of high-pitch, shrill sound
Balance
Adjusts volume level of right and left speakers
Headphone Volume Adjusts the volume of the headphones
Surround sound settings (Off / Simulated Surround / SRS TruSurround XT)
Simulated Surround: Provides a dynamic enhancer to simulate improved spatial effects
SRS TruSurround XT: SRS TruSurround XT
Surround
•
Switching is also possible by the Surround button on the remote control (p. 7)
Volume Correction Adjusts volume of individual channel or input mode
Select stereo / monaural (Mono / Stereo)
•
Normally: Stereo
•
MPX
Stereo signal cannot be received: Mono
•
M1 / M2: Available while mono signal is transmitted
Select to fi t the input signal (Auto / Digital / Analogue) (p. 31)
Auto
Digital
HDMI1 Input
Analogue : HDMI-DVI adapter cable connection
•
HDMI input mode only
•
HDMI2 / 3 terminals are for digital signal only
•
No setting for HDMI2 / 3 available
Reset to Default Press the OK button to reset the present Sound Mode to the default settings
20
Adjustments / Confi gurations (alternatives)
®
creates a high quality surround sound effect
using just two speakers from the source which can output surround
encoded signals
: Automatic detection of digital or analogue sound source
: HDMI cable connection
■
Menu list
Item Adjustments / Confi gurations (alternatives)
Menu
Selects optional colour system based on video signals in AV mode
AV Colour System
(Auto / PAL / SECAM / M.NTSC / NTSC)
Selects which AV terminal is to be used for data communication between this TV and a
Q-Link
compatible recording equipment (AV1 / AV2) (p. 30)
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV1 / AV2 / AV3 / Monitor)
•
AV1 / AV2 out
Monitor: Image displayed on screen
•
Component, PC and HDMI signals cannot be outputted
Download
Downloads channel information to a Q-Link compatible equipment connected to the TV
Child Lock
Locks a programme channel to prevent access to it (p. 24)
Auto Setup
Automatically sets the channels received in the area (p. 22)
Programme Edit
Edits channels (p. 23)
Manual Tuning
Sets the channels manually (p. 23)
Off Timer
Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
OSD Language Changes language for on-screen displays
Selects teletext language (West / East1 / East2)
•
Teletext
• West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish
Language East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian
•
East2: Czech, Hungarian, Lettish, Polish, Rumanian
Teletext
Teletext display mode (TOP (FLOF) / List) (p. 16)
Shipping Condition
Resets all settings, for example, when moving house (p. 25)
Input Labels
Labels or skips each input terminals (p. 26)
Banner Display
• Sets how long the information banner (p. 13) stays on screen
Timeout 0 (No display) to 10 sec. in 1-sec. increments
VIERA Link
Sets to use VIERA Link functions (Off / On) (p. 32)
Software License Displays the software licence information
System Information Displays the system information of this TV
•
A different menu will be displayed while PC or SD Card is used.
•
Only available items can be selected.
(p. 27 and p. 29)
21