Table of Contents
Advertisement
Alarm clock notes
• If the phone is turned off and is locked or the PIN lock is set, the alarm
will turn on the phone. However, the phone remains blocked until you
enter the phone lock code or PIN code.
• If the alarm tone is turned off but Valid. softkey is not pressed, the
alarm indicators remain for up to 15 minutes. Then the phone reverts
back to the standby display.
• The alarm rings for 1 minute until any key (except Valid. softkey) is
pressed to stop the alarm tone. The alarm is still active, and it repeats
3 minutes later. If Valid. softkey is not pressed after the third alarm
tone, the alarm is not repeated but the phone remains turned on and in
the alarm display mode for up to 15 minutes. Then it reverts back to the
standby display.
• If the alarm time arrives during a call, an 'In Call' alert beep sounds every
20 seconds. Press Valid. softkey to turn off alarm.
• If the alarm time arrives while dialing or receiving a call, the alarm is
suspended until the call connects. An 'In Call' alert beep sounds every
20 seconds.
• If the phone is turned off when alarm time arrives, the phone will turn
on. If the alarm is not validated, the phone remains on for 15 minutes,
then turns off.
• If the battery is detached less than 15 minutes before alarm time, the
alarm sounds immediately. Press Valid. softkey to turn off the alarm.
If more than 15 minutes, only the visual indicators appear.
To turn off the alarm permanently,
1
Press
Select Alarm clock.
2
Select Off. Confirmation displays.
3
4
Press Back
. Select Office Tools.
or
to return to the standby display.
67
Advertisement
Table of Contents
