Recording Controls
The Timer programming menu allows you to choose programmes that you wish to record. At the correct
time, the TV will switch on and tune to the correct programme (even if the TV is in Standby mode).
•
TV Guide may also be used to set timer programming. (p. 18)
If the recorder is compatible with Q-Link or similar technologies (p. 43), and setup / connection are
done completely (p. 42 and p. 43), you do not need to programme the recorder – the TV will control
•
the recording progress.
If the recorder is not compatible with Q-Link or similar technologies, set "Q-Link" in Setup Menu (p. 25)
to the connected terminal (AV1 or AV2), and make timer programming of the recorder (Read the
•
manual of the recorder).
"D" means DVB programme and "A" means Analogue programme.
INPUT
OPTION SD CARD
EXIT
RETURN
■
To return to TV
EXIT
■
To stop recording
GUIDE
EXIT
Caution
•
•
The TV must either be On or in standby.
•
For preparations of a recorder, read the manual of the recorder.
•
No other programme can be selected during recording.
It may not be possible to record an encrypted programme (which is copy-protected).
38
Timer Programming from Menu
Display the menu
1
MENU
Select "Setup"
2
Main Menu
VIERA Link
Picture
Sound
Setup
Select "Timer Programming"
3
Setup Menu
Timer Programming
DVB Profile Edit
DVB Service List
Link Settings
Child Lock
Tuning Menu
GUIDE Plus+ Settings
Off Timer
Power on Preference
4
Set
Store
5
1/3
Access
Off
TV
access
select
access
select