Mitsubishi ODYSSEY User Manual page 46

Caller Line Identity - showing/hiding your mobile number
46
Use or to choose between Voice Mail, Names or Number.
5
Press Select
6
The display confirms your request.
Press Exit
7
1. If you select 'On no reply' option you must also enter a delay period of 5, 15 or 30 seconds.
2. Call diverts for both Line 1 and Line 2 must be set individually. Select the out-going line before
following the above procedure. To carry out a call divert on the other line you must select this other
line first (menu Calls & Times - Line selection).
To turn off or check the status of call divert:
Press . Select Settings.
1
Select GSM Services. Select Call diverting
2
3 Select from the divert options and press .
4
Select Cancel or Status.
The phone confirms your selection.
5
Press Exit
To cancel all (multiple) diverts:
Press . Select Settings.
1
Select GSM Services. Select Call diverting
2
Select Cancel all. The phone confirms your selection.
3
4
Press Exit
This action cancels all voice diverts (for voice, faxes and data calls) for the line currently in use. To
cancel call diverts for the other line you must select this other line first (menu Calls & Times - Line
selection).
Most networks allow the Caller Line Identity feature (CLI) i.e. showing
the incoming number (ID) while receiving a call. Selecting Receiving
caller ID allows you to check its availability from the network.
Receiving caller ID
To find out whether a network presents the ID of incoming calls:
Press . Select Settings.
1
Select GSM Services. Select Receiving caller ID.
2
The network returns either Presentation available or Presen-
tation unavailable.
3 Press Exit
To hide your number, on a call by call basis, add #31# before the
number you are calling. Alternatively you can ask your service operator
to always disable the sending of your mobile number. In this case to
reveal your number, on a call by call basis, add *31# before the
number you wish to call.
Standard network setting
To reset the standard network setting for sending your mobile ID:
Press . Select Settings.
1
or to validate your selection.
or to return to the stand-by display.
or to return to the stand-by display.
or to return to the stand-by display.
or to return to the stand-by display.
.
.