Table of Contents
Advertisement
For Automatic Change of the Brightness
of the VCR Display When the VCR Is
Switched Off
1
Press the MENU button U to display the Main menu on
the TV screen.
2
Press the Cursor buttons
(3421) R to select "Display"
and "VCR display" in this order.
Then, select the "VCR display"
field.
3
Press the Cursor buttons (34) R to select the desired
condition.
≥ When the VCR is switched off, the brightness of the
VCR display is as follows:
ON:
Indications are brightly lit.
OFF:
Indications are not lit.
DIMMED: Indications are dimly lit.
4
Press the OK button T to conclude the setting.
5
Press the EXIT button S to exit the On Screen Display.
Settings for the Main Menu Item
"Functions"
To Set the Type of External Source
Equipment that Is Connected to the AV2
21-pin Scart Socket
1
Press the MENU button U to display the Main menu on
the TV screen.
2
Press the Cursor buttons
(3421) R to select
"Functions" and "AV2" in this
order. Then, select the "AV2"
field.
3
Press the Cursor buttons (34) R to select the type of
external source equipment which is connected to the
VCR's AV2 21-pin socket.
≥ Set the external source equipment as follows:
DECODER: When a decoder is connected.
EXT:
When another VCR or a satellite receiver
is connected.
4
Press the OK button T to conclude the setting.
5
Press the EXIT button S to exit the On Screen Display.
46
To Set the Colour TV System Used During
Playback or Recording from an External
Source
1
Main menu
2
Timer record
ChannelGuide : OFF
Tape Library
Display
OSD : 4:3
Tuning
Subtitles : OFF
Clock
Power save : OFF
Functions
VCR display : DIMMED
Language
3
4
5
To Set the Colour Mode for Playback
1
2
3
Main menu
Timer record
AV2: DECODER
TV system: AUTO
Tape Library
Colour mode: COLOUR
Display
Picture: AUTO
Tuning
Remote: VCR 1
Edit: OFF
Clock
Audio mode: NORMAL
Functions
S-VHS P.B.: AUTO
4
Language
NTSC P.B.: PAL TV
5
Press the MENU button U to display the Main menu on
the TV screen.
Press the Cursor buttons
(3421) R to select
"Functions" and "TV system" in
this order. Then, select the
"TV system" field.
Press the Cursor buttons (34) R to select the type of
colour TV system (AUTO, PAL or MESECAM) to be
used during playback or during recording from an
external source.
Press the OK button T to conclude the setting.
Press the EXIT button S to exit the On Screen Display.
Press the MENU button U to display the Main menu on
the TV screen.
Press the Cursor buttons
(3421) R to select
"Functions" and "Colour mode"
in this order. Then, select the
"Colour mode" field.
Press the Cursor buttons (34) R to select the desired
Colour mode for playback.
COLOUR: Normally select this setting.
B/W:
To play back a cassette recorded in black
and white.
Press the OK button T to conclude the setting.
Press the EXIT button S to exit the On Screen Display.
Main menu
Timer record
AV2: DECODER
TV system: AUTO
Tape Library
Colour mode: COLOUR
Display
Picture: AUTO
Tuning
Remote: VCR 1
Edit: OFF
Clock
Audio mode: NORMAL
Functions
S-VHS P.B.: AUTO
Language
NTSC P.B.: PAL TV
Main menu
Timer record
AV2: DECODER
TV system: AUTO
Tape Library
Colour mode: COLOUR
Display
Picture: AUTO
Tuning
Remote: VCR 1
Edit: OFF
Clock
Audio mode: NORMAL
Functions
S-VHS P.B.: AUTO
Language
NTSC P.B.: PAL TV
Advertisement
Table of Contents
