Advertisement
Power Supply Preparations
Refer to the specifications (page 6) for information on operating times when using dry cell batteries.
Using dry cell batteries
(not included)
Insert two "LR6, AA, UM-3" alkaline bat-
teries.
2
1
3
If
the
battery
lid
Removing batteries
comes loose
Push up on the battery
Slide the lid back into
in the direction indicat-
place horizontally.
ed by the arrow. Then
lift it out.
Note!
The dry cell batteries should be changed when the unit is off.
Using rechargeable batteries
(not included)
≥If rechargeable batteries are to be used, rechargeable
batteries manufactured by Panasonic are recommended.
≥This unit cannot recharge batteries. The battery indi-
cator will not function correctly when using recharge-
able batteries.
Location of Controls
A
B
C
D
G
H
G
HOLD Function
HOLD
HOLD mode
2
Using the AC adaptor
(not included)
Use only the recommended AC adaptor. Use of other
AC adaptors can damage the unit.
To order the optional AC adaptor RP-AC46 contact 1-
800-332-5368 or web site (http://www.panasonic.com).
Connect the AC adaptor.
-
+
DC IN jack (DC IN 4.5 V K)
Back panel of the unit
Conserving power
To save power when the unit is not to be used for a long
time, unplug the AC adaptor from the household AC
outlet. Reprogram tracks if necessary before use.
Note!
Turn the unit off before connecting or disconnecting the
AC adaptor.
If the unit malfunctions or freezes during use,
disconnect the power source (the AC adaptor
or batteries).
Re-connect the power source and continue op-
eration.
C
E
F
I
J
K
L
Back panel of the unit
M
N
Battery indicator
Battery indicator
This indicator flashes when the batteries are almost out
of power. Power is cut off completely a short while later.
Replace batteries with new ones.
Household
AC outlet
Note!
The length of time the unit will continue to operate be-
tween when the battery indicator starts flashing and
when the power is cut off differs depending on the type
of batteries used.
AC adaptor
Using the car adaptor
(not included)
Use only the recommended car adaptor. Use of other
car adaptors can damage the unit.
Be sure to obtain the car adaptor (SH-CDC9) available
as an optional accessory.
CAUTION:
Use only car adaptor, Model: SH-CDC9 manufac-
tured by Matsushita Electric Industrial Co.,Ltd.
A Display
B Memory/recall button
(MEMORY/RECALL)
C Headphone volume control
buttons (VOL i,j)
D EQ button (EQ)
E Mode button (MODE)
F Play/pause button (1;)
G Skip/search buttons
(:, 9 6 , 5)
H Stop/operation off button
(∫,OPR OFF)
This function causes the unit to ignore
short, accidental button presses. (The
disc lid can still be opened and closed.)
The HOLD function prevents the
following:
≥The unit is powered on accidentally
when not in use, causing the batteries
to run down.
≥A button is accidentally pressed during
play, interrupting the operation.
To use the HOLD function
Set [HOLD] to the HOLD position.
S-XBSTRAIN
C
ALL
1
M
RANDOM
SORRY
I Hold switch (HOLD)
J Headphone jack (Ë)
K CD release button (PUSH)
L Open switch (OPEN 1)
M Hole for car mounting base
N DC IN jack
(DC IN 4.5 V K)
"(" indication
When the unit is in HOLD mode, press-
ing any button causes the indication
"(" to appear on the display.
When the unit is powered off
The "(" indication appears only
when [ 1; ] is pressed.
Before operating the buttons
Be sure to move [HOLD] to release
the unit from the HOLD mode.
Advertisement
