Album Function - Panasonic NV-HS860EE Operating Instructions Manual

Album Function

The album function lets you collect desired scenes (both
moving and still pictures) and create the equivalent of a photo
album, but on video cassette. The pictures can be copied
onto the cassette from a digital video movie camera, a digital
still camera or a digital VCR for any desired time that you can
preset.
Recording unit (this VCR)
^
Digital still
camera
Preparations
≥ Connect a digital still camera, a digital video movie camera
or another external digital source to the Video Input socket
^ [VIDEO IN (AV3)]/the S-Video Input socket ]
[S-VIDEO IN (AV3)] and Audio Input sockets _
[AUDIO IN (AV3)] on the front panel of this VCR.
≥ Display the VCR picture on the TV.
≥ Insert a cassette with intact erasure prevention tab.
As soon as the cassette is inserted, the Cassette Number
Check starts. Wait a few moments until it is completed.
(See page 16.)
≥ Press the 3D DNR button g to turn 3D DNR function off so
that 3D DNR lamp is not lit, to ensure editing with optimal
picture quality.
Operations
1 Press the STILL ALBUM
button @ on the remote
control to put the VCR in the
recording pause mode.
≥ The VCR automatically selects the AV Input (external
input) "A3" and then switches over to the recording
pause mode. The figure for the preset recording time
(seconds) appears on the VCR display. The initial
setting is "05" (5 seconds).
2 Start playback on the source unit to search for the point
from which you want to copy onto this VCR.
3 When that point is reached,
press the STILL ALBUM
button @ on the remote
control of this VCR again to
start recording.
The VCR records the picture (and sound) for 5 seconds
and then automatically switches over to the recording
pause mode.
4 Repeat above steps 2 and 3 to record other scenes in
succession.
5 When you have recorded all desired scenes, press the
Stop button 9 to finish recording.
Recording unit (this VCR)
]
_
Digital Video
movie camera
REC
REC
To Change the Recording Time:
After step 1 or 3, press the
INDEX L or INDEX K
button K to change the
recording time. You can set any
time between "3" and "20"
seconds.
Hints:
≥ If you connect a digital still camera, use a camera equipped
with the video output socket. Use the cable supplied with
the still camera to connect it. For details, also read the
operating instructions of the equipment to be connected.
≥ If you leave the VCR in the recording pause mode for more
than 5 minutes in step 1 or 3, the VCR automatically
switches over to the stop mode to protect the video heads.
In this case, press the STILL ALBUM button @ again to put
the VCR in the recording pause mode again.
≥ If you want to add background music or narration to the
scenes recorded with the album function, perform Audio
Dubbing as explained on the page 36.
≥ Depending on the output system of the digital still camera,
the pictures may not be recorded correctly.
≥ If you dub still pictures from a conventional analogue video
movie camera or VCR, some picture distortion may occur in
the recorded picture.
REC
Indication when the recording
time is set to "10"
35