Panasonic Viera TXL32C2B Operating Instructions Manual page 30

How to Use Menu Functions
Menu
Channel List
Auto Setup
Manual Tuning
Teletext
Preferred Subtitles
Input Labels
Banner Display Timeout
Playing Time Display
Radio Mode
Shipping Condition
Owner ID
Common Interface
System Update
Software Licence
System Information
Power on Preference
Power on Channel
List
Auto Standby
Power Save
16:9 Overscan
DVI Input Setting
A different menu will be displayed while SD Card is used. (p. 48 - p. 49)
Only available items can be selected.
If "Demo Settings" item is displayed in the Setup Menu, the TV is in "Shop" viewing environment (p. 13).
To return to "Home" viewing environment initialise all settings by accessing Shipping Condition.
30
"Shipping Condition" (p. 44)
Item
Skips the unwanted Analogue channels or edits Analogue channels (p. 39)
Automatically sets the Analogue channels received in the area (p. 35)
Sets the Analogue channels manually (p. 39)
Analogue teletext display mode (FASTEXT / List) (p. 22)
Selects the preferred language for digital channel subtitles (depending on the
broadcaster) (English / Welsh / Gaelic)
To display subtitles
Labels or skips each input terminal (p. 43)
Sets how long the Information banner (p. 15) stays on screen
(0 (No display) / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 seconds)
Set to "On" to display a continuous record of time spent using Game mode every
30 mins (Off / On)
This function is available when "Game" is selected in "Viewing Mode" (p. 28).
Sets the timer for turning off the screen automatically when a radio channel is
selected (Off / 5 / 10 / 15 / 20 seconds)
The sound is active even if the screen turns off.
Press any button (except Volume Up / Down and Sound Mute buttons) to turn
the screen on.
This function is effective in reducing power consumption when listening to a
radio channel.
Resets all settings, for example, when moving house (p. 44)
Inputs the owner ID (p. 45)
Uses include to watch pay-TV (p. 46)
Downloads new software to TV (p. 47)
Displays the software licence information
Displays the system information of this TV
Postcode
Sets your postcode to display advertisements in the GUIDE Plus+ system (p. 20)
System
Displays the system information of the GUIDE Plus+ system
Information
Automatically selects the input when the TV is turned on (TV / AV)
Set to "TV" to view picture from TV tuner.
Set to "AV" to view input from an external equipment connected to a SCART
terminal, e.g. satellite receiver.
The external equipment must be switched on and sending a control signal for
automatic switching at power on to occur.
Automatically selects All Channels or Favourites list in the Information banner
(p. 15) when the TV is turned on (All Channel List / Last)
Set to "All Channel List" to display all the channels.
Set to "Last" to display the one you selected last time.
Not available on analogue mode
Sets the time the TV automatically goes to Standby mode when no operation is
performed for the selected times (Off / 2 / 4 hours)
Starting Timer Programming automatically does not affect this function.
Automatic input switching with the connected equipment affects this function and
time-count will be reset.
The notification message will appear 3 minutes before going to Standby mode.
Reduces brightness of picture to economise on power consumption (Off / On)
Selects the screen area displaying the image (Off / On)
On : Enlarges the image to hide the edge of the image.
Off : Displays the image in the original size.
Set to "On" if noise is generated on the edge of the screen.
This function is available when aspect is set to Auto (16:9 signal only) or 16:9.
This function can be memorized separately for SD (Standard definition) and HD
(High definition) signals.
Changes the black level in the image for HDMI input mode with DVI input signal
manually (Normal / Full)
When the DVI input signal from the external equipment, especially from PC, is
displayed, the black level may not be suitable. In this case, select "Full".
The black level for HDMI input signal will be adjusted automatically.
For HDMI input mode with DVI input signal only
Adjustments / Configurations (alternatives)
p. 16