Panasonic Lumix DMC-GH3A Basic Operating Instructions Manual page 47

White Balance Bracket
Bracket setting is performed based on the adjustment values for the White Balance fine
adjustment, and 3 pictures with different colours are automatically recorded when the
shutter button is pressed once.
1
Press [ ].
2
Rotate the rear dial or front dial to select the White
Balance, and then press 4.
3
Rotate the control dial to set the bracket.
Rotating the control dial to the right: Horizontal ([A] to [B])
Rotating the control dial to the left: Vertical ([G] to [M])
•
You can also set the bracket by touching [
•
To reset, press [DISP.].
4
Press [MENU/SET].
Setting the White Balance manually
Set the White Balance value. Use to match the condition when taking photographs.
1
Press [ ].
2
Rotate the rear dial or front dial to select [
press 3.
3
Aim the camera at a sheet of white paper etc. so that the
frame in the centre is filled by the white object only and
then press [MENU/SET].
Setting the colour temperature
You can set the colour temperature manually for taking natural pictures in different lighting
conditions. The colour of light is measured as a number in degrees Kelvin. As the colour
temperature increases, the picture becomes more bluish. As the colour temperature
decreases, the picture becomes more reddish.
1
Press [ ].
2
Rotate the rear or front dial to select [
3
Press 3/4 to select the colour temperature and then
press [MENU/SET].
•
You can set a colour temperature from [2500K] to [10000K].
]/[ ].
], [ ], [
1 2 3
], and then press 3.
Recording
G G G G G G
A A A A A A
M M M M M M
4
], or [ ], and then
6500K
(ENG) VQT4M51
B B B B B B B
47