Conformity Declaration - Makita DCS34 Instruction Manual

EU Conformity Declaration
The undersigned, Tamiro Kishima and Rainer Bergfeld, as authorized by DOLMAR GmbH, declare that the MAKITA machines,
Type: 036/037 EU prototype test certificate No.
DCS34 M6 08 01 24243 082
DCS4610 M6 08 01 24243 082
manufactured by DOLMAR GmbH, Jenfelder Str. 38, 045 Hamburg, Germany, conforms to the basic safety and health require-
ments of the applicable EU guidelines:
EU Machine Directive 98/37/ EG,
EU EMC Directive 89/336/ EWG (modified by 91/263/ EWG, 92/31/EWG and 93/68/ EWG),
Noise emission 000/4/EG.
Starting on 9 Dec. 009, Directive 006/4/EG will come into force, replacing Directive 98/37/EG. This product meets the requirements of
the new Directive.
The most important standards applied to properly meet the requirements of the above EU Directive were: EN 68-, EN ISO
498, CISPR .
The conformity assessment procedure 000/4/EG was performed per Annex V. The measured sound power level (Lwa) is  dB(A).
The guaranteed sound power level (Ld) is  dB(A).
The EU Type-Examination was performed by: TÜV Product Service GmbH, Zertifizierungsstelle, Ridlerstraße 3,
D-80339 München.
The technical documentation is on file at DOLMAR GmbH, Jenfelder Strasse 38, Department FZ, 22045 Hamburg, Germany.
Hamburg, 0.. 008
For DOLMAR GmbH
Tamiro Kishima
Managing Director
Rainer Bergfeld
Managing Director
7