Panasonic TH-42PW4 Operating Instructions Manual page 13

Explanations from here onward describe the functions when the optional BNC Terminal Board is installed.
SURROUND button
(see page 23)
SURROUND
VOL
N
PICTURE SOUND
PICTURE
POS. /SIZE
PC
PLASMA DISPLAY
INPUT
R
SET UP
ASPECT
OFF TIMER
INPUT button
(AV(S Video)/Component, RGB/PC Mode
Selection)
Press to select AV(S Video)/Component or
RGB/PC input signal modes sequentially.
(see page 15)
Sound mute On/Off (see page 22)
Volume Adjustment
Press the Volume Up "+" or Down "–" Button
to increase or decrease the sound volume
level.
R button
ACTION button
Press to make selections
POSITION buttons
SETUP button (see page 16)
SOUND button (see page 22)
ASPECT button
Press to adjust the aspect.
(see page 18)
OFF TIMER button
The Plasma Display may be preset to switch to stand-by
after a fixed period. The setting changes to 30 minutes, 60
minutes, 90 minutes and 0 minutes (off timer cancelled) each
time the button is pressed.
30 60
0
When three minutes remain, "Off timer 3" will flash.
The off timer is cancelled if a power interruption occurs.
Basic Controls
90
13