Panasonic QuintrixF TX-28PK25 Operating Instructions Manual page 8

QUICK START GUIDE
4. Q- -Link connection of TV, VCR and Satellite Receiver using Scart and RF cables
For Q- -Link to function correctly the TV, VCR and Satellite Receiver must be connected as shown in the diagram below.
Scart Connections
'Fully wired' Scart cables should be used for all of the Scart connections.
The AV2 Scart of the VCR must be connected to the VCR socket of the Satellite Receiver.
D
The TV Scart socket of the Satellite Receiver must be connected to the AV1 Scart socket of the TV.
D
Note :
If using a "Q- -Link" VCR then the AV1 Scart of the VCR must be connected to the AV2 socket of the TV. If your VCR is not a "Q- -Link"
VCR, please consult your VCR operating instruction book.
RF Connections
Connect an RF cable to the Aerial In socket of the Satellite Receiver.
D
Connect an RF cable from the RF Out socket of the Satellite Receiver to the RF In socket of the VCR.
D
Connect an RF cable from the RF Out socket of the VCR to the TV Aerial In socket (
D
TV
Mains
Socket
Aerial
Input
socket
Notes :
Additional equipment and cables are not supplied.
Further details of Audio / Video connections can be found on pages 35 and 36.
Further information for VCR and Satellite Receiver installation with this TV can be found on page 31.
8
AV1 Scart
socket
AV2 Scart
socket
Mains
Socket
Mains
Socket
TV Scart
socket
VCR Scart
socket
VCR Scart socket
Scart socket
).
Aerial
Output
socket
Aerial
Input
socket
AV1
AV2
SATELLITE
RECEIVER
Aerial
Input
socket
Aerial
Output
socket