Panasonic PV-V4622-K Operating Instructions Manual page 35

*Important: If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
Auto Shut-Off Feature
The power shuts off at a preset time.
1
Press ACTION
to display menu.
2
Press
VCR C / A CLOCK CH
REPEAT PLAY :OFF
to select AUTO
T I ME STAMP :ON
REMOTE WARNING :ON
SHUT-OFF.
AUTO SHUT- OFF :ON
AUTO VCR/TV :ON
IDIOMA/LANGUE : ENGLISH Press
VCR' S OUTPUT CH :3
SELECT : SET :
to change shut-off
EXIT : ACT I ON
time as shown
below.
2 Hours
OFF
4 Hours
6 Hours
3
Press ACTION
to return to normal screen.
Note
The shut-off countdown will not function
during Play or Record.
VCR/TV Selector Feature
The VCR VCR/TV selection can be set to
auto or manual.
1
Press ACTION
VCR C / A CLOCK CH
REPEAT PLAY :OFF
T I ME STAMP :ON
to display menu.
REMOTE WARNING :ON
AUTO SHUT- OFF :OFF
AUTO VCR/TV :ON
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH :3
SELECT :
EXIT : ACT I ON
2
Press
VCR C / A CLOCK CH
REPEAT PLAY :OFF
to select AUTO
T I ME STAMP :ON
REMOTE WARNING :ON
VCR/TV.
AUTO SHUT- OFF :ON
AUTO VCR/TV :ON
Press
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH :3
ON or OFF.
SELECT : SET :
EXIT : ACT I ON
• OFF(Manual): You select "VCR" or "TV"
mode using the VCR/TV
button on the unit or remote.
• ON(Auto): "VCR" mode is automatically
set when VCR is turned on,
or in Play mode.
3 Press ACTION
to return to normal screen.
Note
For more on VCR/TV selection, see "Record
one station, watch another" and "Select
channels on VCR" sections (p.15).
Weak Signal Display ON/OFF Feature
When set to "ON," picture is displayed
regardless of signal strength.
1
VCR C / A CLOCK
REPEAT PLAY
T I ME STAMP
REMOTE WARNING
AUTO SHUT- OFF
AUTO VCR/TV
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH
SELECT :
EXIT : ACT I ON
repeatedly
2
VCR C / A CLOCK CHANNEL
ANTENNA : CABLE
AUTO SET
CHANNEL CAPTION
WEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
SELECT : SET :
EXIT : ACT I ON
• ON: Picture is displayed despite signal
condition and may be of poor quality.
OFF: Screen turns solid blue when signal is
weak or non-existent.
• Selecting ON has no effect on connected
equipment with blue back feature.
3
Press ACTION
to return to normal screen.
Shuttle Variable Speed Search
The SHUTTLE Ring allows you to smoothly
control the tape speed during special effects
playback in both forward or reverse.
Begin the forward or reverse search.
Turn SHUTTLE Ring while in Play or Still mode.
• The more you turn the Ring, the faster the
search speed will be.
to set
Release the Shuttle mode.
Press a function button such as : PLAY,
STOP, etc.
• The VCR performs the function of the button
pressed.
Notes
• When the SHUTTLE Ring is turned more
than half in Stop mode, normal Fast Forward
or Rewind will begin.
• Some noise bars are normal during Shuttle
operation.
• After 3 minutes in Still or Slow, the VCR will
go into Stop mode.
• When the SHUTTLE Ring is released, the
VCR goes into Still mode.
Press ACTION
CH
:OFF
to display menu.
:ON
:ON
:OFF
:ON
:3
Press
to select and
display CHANNEL.
Press to select
WEAK SIGNAL
DISPLAY, and
press to set ON
or OFF.
35