Panasonic Viera TH-42PZ85B Operating Instructions Manual page 27

■
Menu list
Menu Item
Timer Programming
DVB Profi le Edit
DVB Service List
Analogue Service List
VIERA Link
Q-Link
AV1 / AV2 out
Q-Link Download
Child Lock
Auto Setup
DVB Manual Tuning
Analogue
Manual Tuning
Add New DVB
Services
New Service
Message
DVB Signal Condition
Intelligent Frame
Creation
Postcode
System
Information
Off Timer
Power on Preference
Teletext
Preferred Subtitles
Shipping Condition
Owner ID
Common Interface
System Update
Power Save
Side Panel
Picture Overscan
Input Labels
Banner Display
Timeout
Software Licence
System Information
•
• A different menu will be displayed while PC or SD Card is used.
Only available items can be selected.
Adjustments / Configurations (alternatives)
Records forthcoming programmes (p. 40)
Creates list of favourite programmes (p. 32)
Skips the unwanted DVB programmes (p. 33)
Skips the unwanted Analogue programmes or edits Analogue programmes (p. 33)
Sets to use VIERA Link functions (Off / On) (p. 46)
Selects which AV terminal is to be used for data communication between this TV and a
compatible recorder (AV1 / AV2) (p. 45)
•
Select the connected terminal to the recorder even it is not compatible with Q-Link.
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV1 / AV2 / AV3 / Monitor)
•
Monitor: Image displayed on screen
•
Component, PC and HDMI signals cannot be outputted.
Downloads analogue programme information to a Q-Link compatible equipment
connected to the TV
Locks a programme / AV input to prevent access to it (p. 33)
Automatically sets the programmes received in the area (p. 35)
Sets the DVB programmes manually (p. 35)
Sets the Analogue programmes manually (p. 35)
Adds new DVB services (p. 35)
Selects whether to give a notifi cation message when a new DVB service is found (p. 35)
Checks the DVB signal condition (p. 35)
Automatically compensates the picture frame rate to make the image smooth (Off / On)
•
24p or 50i/p input signals are recommended for using this function.
•
Not valid on PC and SD Card
Sets your postcode to display advertisements in the GUIDE Plus+ system (p. 20)
Displays the system information of the GUIDE Plus+ system
Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Set to "TV" to view picture from TV tuner.
Set to "AV" to view input from an external equipment connected to a SCART terminal,
e.g. satellite receiver (TV / AV)
•
The external equipment must be switched on and sending a control signal for
automatic switching at power on to occur.
Analogue teletext display mode (FASTEXT / List) (p. 18)
Selects the preferred language for DVB subtitles (depending on the broadcaster)
•
To display subtitles p. 14
Resets all settings, for example, when moving house (p. 36)
Inputs the owner ID (p. 37)
Uses include to watch pay-TV (p. 31)
Downloads new software to TV (p. 31)
Reduces brightness of picture to economise on power consumption (Off / On)
Increases the brightness of the side panel (Off / Low / Mid / High)
•
The recommended setting is "High" to prevent panel "image retention".
Selects the screen area displaying the image (Off / On)
On : Enlarged the image to hide the edge of the image.
Off : Displayed the image in the original size.
•
Set to "On" if noise is generated on the edge of the screen.
•
This function is available when aspect is set to Auto (16:9 signal only) or 16:9.
•
This function can be memorized separately for SD (Standard defi nition) and HD (High
defi nition) signals.
Labels or skips each input terminal (p. 38)
Sets how long the information banner (p. 15) stays on screen
•
0 (No display) to 10 sec. in 1-sec. increments
Displays the software licence information
Displays the system information of this TV
(p. 39 and p. 43)
27