Exterior; Cappuccinatore; Stainless Steel Surfaces; Jog Shuttles - Miele CVA 2660 Operating Instructions Manual

The front of the appliance can be
cleaned with a sponge and a solution of
warm water and non abrasive liquid
dish soap. Dry with a soft cloth.
Only use a slightly damp sponge
when cleaning the controls. Water
could penetrate into the electronics
and cause damage.
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner.
To help prevent soiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
Clean the jog shuttles with a sponge
and a solution of warm water and liquid
dish soap.
^ These jog shuttles may become
discolored or damaged if not cleaned
regularly. Do not use a stainless steel
cleaner on the jog shuttles.
40
Clean the cappuccinatore after every
use, otherwise it may become blocked
with dried milk and hard to clean.
^ Press the spout together from the top
and bottom to pull out the two pieces
of the spout together. See below.
^ Take the cappuccinatore apart and
clean.