Safety Instructions - Haier HWD1500 User Manual

IMPORTANT SAFETY INSTRUCTIONS
Warning- To reduce the risk of fire,.electric shock, or injury to persons when using
your appliance, follow basic precautions, including the following:
1. Read all instructions before using the appliance.
2. Use this appliance only for its intended purpose as described in this use and care
guide.
3. Use only detergents or softeners recommended for use in this appliance and keep
them out of the reach of children.
4. This appliance must be properly installed in accordance with the installation
instructions before it is used.
5. Never unplug your appliance by pulling on the power cord. Always grasp the
plug firmly and pull straight out from the outlet.
6. Replace immediately worn power cords, loose plugs/power outlets.
7. Unplug your appliance before cleaning or before making any repairs.
8. If your old appliance is not being used, we recommend that you remove the
door. This will reduce the possibility of danger to children.
9. Do not operate your appliance in the presence of explosive fumes.
10. Do not use this appliance to wash clothes soaked, spotted or washed in
gasoline, dry cleaning solvents or any other explosive or flammable substances
that could ignite and explode.
11. Clothes or rags used to clean flammable or explosive materials should not be
washed in this appliance till all traces of this material has been removed, to
avoid an accident.
12. Do not add or mix any flammabJe or explosive substances to the wash.
13. Do not operate your appliance when par~s are missing or parts are broken.
14. Do not use this appliance I:or commercial clothes washing.
15. Do not operate this appliance unless all enclosure panels are properly in place.
16. Do not tamper with controls.
17. To reduce risk of injury do not allow children to play in or on the appliance.
Close supervision of children is necessary when the appliance is used near
children.
18. This appliance must be connected to proper electrical outlet with the
correct electrical supply.
Proper grounding must be ensured to reduce the risk of shock and fire.