Faqs - Panasonic Viera TX-26LXD8 Operating Instructions Manual

FAQs

Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care
Centre for assistance. For details (p. 60)
White spots or shadow
images (noise)
•
Check the position, direction, and
connection of the aerial.
Neither image nor
sound is produced
•
Is the TV in "AV mode"?
•
Is the mains lead plugged into the socket
outlet?
•
Is the TV turned On?
•
Check Picture Menu (p. 22) and volume.
•
Check all required SCART cables and
connections are ¿ rmly in place.
Auto aspect
•
Auto aspect is designed to provide you
with the best aspect ratio to use to ¿ ll your
screen. For user control please see p. 48.
S-Video / black and
white picture
•
Using AV button please con¿ rm your
selection is S-Video I.e. AV2/S (p. 20).
No programmes shown
on TV Guide
TV Guide: Portrait
Wed 24/10/2007 All Types
10:46
Wed 24th
D 1 BBC O D 7 BBC T D 14 E4
•
Check the DVB transmitter.
•
Adjust the direction of the aerial to another
transmitter installed nearby.
•
Check the analogue broadcast.
If the image quality is poor, check the
aerial and consult your nearest dealer.
On Screen messages
- I.e. EC/AV1
•
You can simply clear these
Press again to redisplay.
All Services
D 70 CBBC
Q-Link function does not work
•
Please con¿ rm SCART cable and connection. Also please
set "AV1 / AV2 out" in the Setup Menu (p. 25).
"VIERA Link" function
does not work and an error
message appears
•
Con¿ rm the connection.
•
Turn the connected equipment on and then switch the TV
on. (p. 44)
Recording does not start
immediately
•
Check the settings of the recorder. For details, read the
manual of the recorder.
There may be red spots, blue
spots, green spots and black
spots on the screen
•
This is a characteristic of liquid crystal panels and is not
a problem. The liquid crystal panel is built with very high
precision technology giving you ¿ ne picture details.
Occasionally, a few non-active pixels may appear on the
screen as a ¿ xed point of red, green, blue or black.
Please note this does not affect the performance of your LCD.
The LCD panel moves slightly
when it is pushed with a finger
Clattered sound might be heard
•
There is some À exibility around the panel to prevent the
damage to the panel.
Panel might move slightly when it is pushed with a ¿ nger, and
clattered sound might be heard. This is not a malfunction.
51