Table of Contents
Advertisement
3.1
OSD Setting Menus
Follow the instructions indicated on the bottom of the OSD Function Menu. Press
on the control panel or
/
CH
CH
through the menus. press INPUT/ VOL+ on the control panel or OK key on the
remote control to select an item and then press MENU/ VOL- key to exit the OSD
menu. The following menus can be set by different adjustment methods.
3.2
Adjusting Picture Settings
1
Press MENU to enter the OSD Main Menu
screen.
2
Press
/
on the remote control or
CH
/ CH
on the control panel to select
Picture menu.
3
Press
/ OK on the remote control or
INPUT/ VOL+ on the control panel to
enter the Picture menu.
4
Press
/
on the remote control or CH
an item.
5
Press
/ OK on the remote control or INPUT/ VOL+ on the control panel to enter
the item.
6
Press
/
on the remote control or
the scales or press OK on the remote control or INPUT/ VOL+ on the control panel
to mark an item.
7
Press RETURN to return to the Picture menu.
8
Press MENU/ VOL- to exit the Picture menu.
9
The Picture menu can be used to adjust the Picture mode, Brightness, Contrast,
Sharpness, Color, Tint, Digital NR, X-Contrast, Aspect Ratio, Color Temp and
Recall settings. Brightness, Contrast, Sharpness, Color, and Tint are only
available for adjustments if you select User in Picture Mode. Press
remote control or
• The Picture Mode can be set to Vivid,
• The Digital NR can be set to Off, Weak,
• The X-Contrast can be set to
• The Aspect Ratio can be set to Full, Normal, Zoom, Subtitle, Auto, Zoom-1,
Wide.
• The Color Temp can be set to Warm, Standard, or Cool.
• The Recall can be used to reset the original factory settings.
Note:
The items available on the OSD may vary depending on the input signal source.
28
/
VOL+
VOL+
VOL-
/
on the control panel to adjust these settings.
Off
or On.
arrow keys on the remote control to scroll
Picture Mode
Picture
Brightness
Audio
Contrast
Sharpness
Channel
Color
Tint
V-CHIP
Digital NR
Setup
X-Contrast
Aspect Ratio
Next Page
Move
Enter
OK
/ CH
on the control panel to select
VOL-
/
on the control panel, to change
Standard
, Movie, or User.
Medium
, or Strong.
Return
Exit
Return
Menu
/
on the
Advertisement
Table of Contents
