Recording music on the unit
Connecting the unit to the computer
Before connecting the unit to the computer, be absolutely sure to
insert the battery into the unit. (
1
Start the computer.
Open the USB port cover and connect the USB cable
2
to the unit.
Insert straight in so that the arrow side faces in the direction
shown above.
3
Connect the USB cable to the PC's USB port.
• When the connection is complete, "USB
CONNECTED" appears, and music can
be recorded.
• On your computer, open My Computer,
and check whether the unit is indicated
as a "Removable Disk".
• When the "LOW BATTERY" or "NO BATTERY" message
appears on the screen, replace the battery with a new one.
Note
• Keep the USB cable as straight as possible. Bending the cable too much may
destroy music data or cause problems with the computer.
• Operation cannot be guaranteed if you use a USB hub or extension cable.
• Inserting the cable forcibly into the USB connector diagonally or the wrong way
round may deform the connector, causing problems with the unit and any device
connected to it.
8
8
page 5)
2
USB cable (included)
1
Removable Disk (x:)
3