Panasonic NV-FJ614 Operating Instructions Manual page 13

Timer Recording with ShowView
Switch on the TV to the video output channel, insert a cassette with an
intact erasure prevention tab into the VCR and set the
remote control to VCR operation
Press this button.
Enter the ShowView number.
For correction use
To access [Timer recording], press
Select your Channel [Pos]
store with (only necessary the
first Timer recording for each Channel).
The [Name] of the Channel you can set
manually (see page 9).
Set the Tape Speed SP, LP,
EP (SUPER LP) or A (automatic).
In the setting A the VCR switches automatically
(with a short picture distortion) to the slow tape speed LP,
to record the programme so long as possible.
To store the programme, press
In order to preset other recordings repeat this procedure.
To check the Remaining tape time,
look to the VCR display Remain.
Make sure that the remaining time
on the cassette is longer than the
time set for recording, otherwise the
whole programmes cannot be recorded.
Switch the VCR to Standby mode for
Timer recording. Make sure that the
VCR display appears.
Notes:
You can use the cursors on the remote control to move around
the menu , in order to make changes
S V
HOW IEW is a trademark of Gemstar Development
S
Corporation. The HOW
under licence from Gemstar Development Corporation.
VQT9002
Functions of the NV-FJ614 Series (Hi-Fi)
.
Show View
8 3 5 4 2 - - - -
.
Timer recording
Pos
.
Name DATE
1. - - - - - - - 13:30 14:00 SP
Timer recording
and
Pos
Name DATE
1. 1 *** 01
Timer recording
Pos
Name DATE
1. *** 01 8/12
2.- - - - - - -/- -
.
.
V
IEW system is manufactured
Panasonic VCR
Panasonic VCR
1/2
Start Stop
ON OFF
Panasonic VCR
1/2
Start Stop
ON OFF
13:30 14:00 SP
Panasonic VCR
1/2
Start Stop
ON OFF
13:30 14:00 SP
- -:- - - -:- - -
13