Panasonic KX-T7531 Operating Instructions Manual page 5

AUTO ANSWER/MUTE
AUTO ANSWER is used to answer an
intercom call automatically.
MUTE is used to listen to the other
party without them hearing you.
VOICE CALL/MUTE (KX-T7550 only)
VOICE CALL is used to monitor an
intercom call automatically.
AUTO DIAL/STORE
Used for speed dialling in the system or
storing program changes.
CONFERENCE
Used to make a three-party conference.
FLASH
Used to disconnect the current call
and make another call with holding
the same outside line.
Flexible Outside (CO) Line Button
Used to make or receive an outside call,
or access a feature if the button is
assigned as a One-touch dialling button.
Function Button
Used to perform the displayed
function or operation.
FWD/DND
Used to perform Call Forwarding or
Do Not Disturb.
HOLD
Used to place a call on hold.
INTERCOM
Used to make or receive intercom calls.
Jog Dial
Used to adjust the volume and the
display contrast or select desired items
for each functions.
For KX-T7533 and KX-T7536 Users
The display can be adjusted.
1 Press the LCD ADJ button.
2 Lift or put down the display.
MESSAGE
Used to leave a notification or call
back the party who left the
notification.
MODE
MODE
Used to set the display to access a
feature.
PAUSE
Used to insert a pause in speed dial
numbers or in other numbers.
PROGRAM
Used to enter and exit the
programming mode.
REDIAL
Used to redial.
SELECT
SELECT
Used to select the displayed function
or to call the displayed phone number.
SHIFT
SHIFT
Used to alternate the sub function on
the display.
Soft Button
Used to perform the function or
operation that appears on the bottom
line of the display.
SP-PHONE
Used for the handsfree operation.
MONITOR (KX-T7550 only)
Used for handsfree dialling. You can
monitor the party's voice handsfree.
TRANSFER
Used to transfer a call to another
party.
Display
LCD ADJ
button
5