Table of Contents
Advertisement
8. Programmable Features
Feature/Code
Setting the Caller ID list to
print automatically
{#}{2}{1}{6}
Setting the recording paper
size in the paper input tray
{#}{3}{8}{0}
Setting the waiting time for
the power save mode
{#}{4}{0}{3}
Holding the previous contrast
setting
{#}{4}{6}{2}
Setting the default operation
mode
{#}{4}{6}{3}
Setting the default operation
mode timer
{#}{4}{6}{4}
Setting toner save feature
{#}{4}{8}{2}
54
Selection
{0} "OFF" (default): The unit will not print the Caller ID list, but will keep records
of the information for the last 30 callers.
{1} "ON": The unit will print the Caller ID list automatically after every 30 new
calls (page 49).
{1} "LETTER": Letter size paper
{2} "A4" (default): A4 size paper
{3} "LEGAL": Legal size paper
To set the length of time before the unit enters the power save mode.
{1} "5min": 5 minutes
{2} "15min" (default): 15 minutes
{3} "30min": 30 minutes
{4} "1h": 1 hour
Note:
L During the power save mode, the unit needs to preheat the fuser unit before
printing.
{0} "DISABLED" (default): Deactivates this feature.
{1} "ENABLED": The unit will hold the previous setting.
Note:
L The previous setting will be held individually for copying and sending faxes.
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{1} "COPY" (default): Copy mode is selected as default.
{2} "FAX": Fax mode is selected as default.
Note:
L You cannot select the scan mode using this feature.
To set the timer before returning to the default operation mode (feature #463).
{0} "OFF": Deactivates this feature.
{1} "30s": 30 seconds
{2} "1min" (default): 1 minute
{3} "2min": 2 minutes
{4} "5min": 5 minutes
{0} "OFF" (default): Deactivates this feature.
{1} "ON": The toner cartridge will last longer.
Note:
L This feature may lower the print quality by reducing toner consumption.
Advertisement
Table of Contents
