Displaying Pc Screen On Tv - Panasonic Viera TH-42PX600EN Operating Instructions Manual

Editing and Setting Channels
You can re-tune all TV channels when moving house or search for new services which may have
recently started broadcasting.
1 Display the menu
2 Select "Setup menu"
M ai n m e n u
3
Select
"DVB Setup Menu"
4 Select "Tuning Menu"
DVB Setup Menu
Profile Edit
Child Lock
Tuning Menu
Tuner Lock
■
Multi Audio
To exit Subtitles
Teletext
System Setup
System Update
5 Select the function and set
•
No data is stored
DVB Tuning Menu
if an Auto Setup
Auto Setup
sequence is
Add New Service
Manual Tuning
interrupted.
New Service Message
Signal Condition
Item
Automatically sets the DVB channels in the area.
•
Auto Setup
The current setting is erased.
•
If a Child Lock PIN number (p. 22) has been set, it must be entered again.
Adds a new DVB service.
•
Add New Service
A new station is added to the DVB channel list, when found.
•
The new station is added with the current settings saved as they are.
Sets the DVB channels manually.
Normally use "Auto Setup" or "Add New Service" for the channel setting.
If tuning has not done completely, use this function.
select channel
Manual Tuning
adjust frequency
( set where the level of "Signal Quality" becomes the maximum)
search
Selects whether to give a notifi cation message
New Service
when a new DVB service is found.
Message
(On / Off)
Selects a channel and checks the DVB signal condition.
Use for adjusting the direction of the aerial.
Signal Quality:
•
Green bar Good
•
Signal Condition
Yellow bar Poor
•
Red bar Bad (Check the aerial)
•
24 To change the programme during the menu appears
next
P i c t u r e m e n u
select
Sound menu
S e t u p me n u
next
select
next
Access
Off
select
ger
ger
ger
set
Access
select
On
Adjustments / Confi gurations
DVB Manual Tuning
Frequency
Signal Quality
Signal Strength
Prog. Channel Service Name
4 34 VOX
5 54 N24
6 54 ProSieben
7 54 KABEL1
8 54 S
Stopped
(Message example)
New DVB Service Found!
Press OK to add new service
Press EXIT to lgnore
Signal Condition
DVB Programme
Signal Quality
Signal Strength

Displaying PC Screen on TV

(DVB mode)
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 34)
■
PC menu setting (changed as desired)
•
Making settings
Menu Item
Viewing mode, Contrast, Brightness, Sharpness, Colour balance (p. 16)
Advanced
setting
PC
setup
[CH25] 506,00 MHz
0 10
0 10
NetID. TS ID. Quality
12302 4158 9
12302 4158 9
12302 4158 9
12302 4158 9
12302 4158 9
Control with HDMI, Volume correction, Side panel, Power save, System language (p. 16)
•
Sound menu (p. 16)
CH30 1 BBC ONE Wales
0 5 10
1 Select the external input
Select "PC"
2
(To next page)
blue
Press twice
yellow
■
To return to TV
"How to Use Menu Functions" to (p. 16)
Adjustments / Confi gurations (options)
W/B High R White balance of bright red area
W/B High B White balance of bright blue area
W/B Low R White balance of dark red area
W/B Low B White balance of dark blue area
Gamma (2.0 / 2.2 / 2.5 / S Curve)
Switches to a wide view
•
Input VGA (640 x 480 dots), WVGA (852 x 480 dots),
resolution XGA (1,024 x 768 dots), WXGA (1,366 x 768 dots)
•
Options change depending on signals
Clock Set to the minimum level if noise occurs
Adjust horizontal position
H-pos
Adjust vertical position
V-pos
Eliminate fl icker and distortion
•
Clock phase
Adjust after Clock adjustment
Chooses another synchronous signal if the image is distorted (H&V / On G)
•
Sync H&V : by the horizontal and vertical signals from your PC
On G : by the green signal from your PC (if available)
•
Corresponding signals
(p. 39)
•
If "H-freq." or "V-freq."
is shown in red, the
signals may not be
supported.
Displays PC screen
and
repeatedly adjusted
•
Set to the minimum level if noise occurs
25