Link Functions
■
Preparations
●
Connect the DVD Recorder / VCR with the following logos:
"Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic" or "SMARTLINK"
●
Q-Link connection
●
Use fully wired SCART cable.
●
Set up the DVD Recorder / VCR. Read the manual of the recorder.
●
Q-Link terminal setup in the Setup Menu
●
Download preset - channel, language, country / region settings
■
Features available
Preset download
Channel, language, country / region settings can be downloaded to the recorder.
●
DVB-C channel setting cannot be downloaded.
●
To download settings
Direct TV Recording -
Recording the current programme in DVD Recorder / VCR immediately.
DIRECT TV REC
Power on link and Easy playback
Set Power on Link "On" in the Setup Menu to use this function
When DVD Recorder / VCR starts playback or direct navigator / function menu for the equipment
are activated, the TV is turned on and input mode is switched automatically so that you can view the
content. (Only when the TV is in Standby mode.)
Power off link
Set Power off Link "On" in the Setup Menu to use this function
When TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when the
videocassette or disc is not active.)
●
This function will work even if the TV enters Standby mode automatically by auto power standby function.
•
"DATA LOGIC" (a trademark of Metz Corporation)
•
"Easy Link" (a trademark of Philips Corporation)
Note
●
52
Some recorders are not applicable. Read the manual of the recorder.
p. 50
"Download" (p. 28) or "Auto Setup" (p. 33) or "Auto Setup" - when first using the TV
(p. 12 and p. 13)
What you see is What you record
●
Available conditions:
DIRECT TV REC
Analogue
DVB
EXIT
AV
( watching recorder's tuner)
AV
( watching recorder's external input)
AV
( watching TV's external input)
●
When Direct TV Recording is performed, the recorder is automatically
turned on if it is in Standby mode.
●
Changing channel or turning off the TV is available while the recorder is
recording from its own tuner.
●
Changing channel is not available while the recorder is recording from
the TV tuner.
■
To stop recording
(
Q-Link
VIERA Link
Q-Link
"AV1 out" (p. 28)
"Preset download" (see below)
Current mode
Unlock the tuner
Tuner Locked
Please stop recording to operate
Unlock
Continue
•
"Megalogic" (a trademark of Grundig Corporation)
•
"SMARTLINK" (a trademark of Sony Corporation)
)
Using tuner
How to record
TV
TV monitor out
Recorder
Recorder's tuner
TV
TV monitor out
Recorder
Recorder's tuner
Recorder's
–
external input
–
TV monitor out
EXIT
"Power on Link" (p. 28)
"Power off Link" (p. 28)