Konica Minolta Q-EZ Instruction Manual page 36

In case of possible breakdowns
If you suspect that something is wrong with
the equipment, check the following points.
Please read this Instruction Manual again to
check whether you have made any mistakes in
operations. If the problem persists, discontinue
use of the equipment and contact your dealer.
Power does not go ON.
• Press the power button to turn the power ON
again.
• Check whether the batteries are properly
inserted.
• If the batteries are low, replace them with
new ones.
Not possible to take pictures.
• Check the number of remaining pictures, if
the number is 0, either erase pictures that
have already been taken or replace the
miniature card.
• Check whether the miniature card is properly
inserted and reinsert when necessary.
• Check whether the write-protect switch on
the miniature card is in the position to allow
writing.
Not possible to transfer images.
• Check
whether
connected.
• Check the battery level.
• Recheck the PC settings and connection.
• Restart the PC software and PC.
The images fail to appear with the proper
brightness.
• Use the flash to take the picture again.
• Make
adjustments
correction button.
the cable is properly
with the exposure