Before Use - Panasonic CN-DV2300N Operating Instructions Manual

Before Use

Insert the map disc (option) into the unit to start the Mobile Navigation System.
■Map Disc
●Only map discs with a NAVTECH DVD-SDAL format that are seamless supported can
be used with this unit. Use DVD-SDAL-formatted map discs (SEAMLESS) that
Cautions
NAVTECH has specifically designed for this unit (Order Number T1000-5073).
●Refer to "Handling and Care of Map Discs" to know how to handle a map disc
(
1 Turn the vehicle's ignition switch
to the ON or ACC position.
11
2 Slide the front cover of the unit.
3 Insert the map disc
with the printed side facing
up, and close the front
cover by pushing it up.
4
Read the [Warning]
●Current position map
appears.
5
Select a Language (Default: English).
12
page 39).
S ROUTE CALCU LATION
•BORD ERLES GPS RECEI VER
•ALL IN VIEW
SENSO R
•GYRO SCOPE
Select
Activation
Notes
●The map disc cannot be inserted or ejected while the
ignition switch is in the OFF position.
●Remember that the battery can run down if the ignition
switch is kept in the ON or ACC position for a long time while
the engine not running.
●If the monitor power is not linked with the power of the
navigation system, press the power button on the monitor to
turn the monitor power on.
Notes
●Do not start driving until the opening screen and caution
screen close. This allows the system to stabilize.
●Condensation may form on the optical lens or the map disc
inside the unit when the temperature in the vehicle increases in
a short time such as when heating the car on a cold day. This
condensation may cause malfunctions. If so, then unload the
map disc and do not operate the unit for approximately 1
hour.
Wipe the condensation off the map disc with a soft cloth.
If the unit does not operate correctly over 1 hour, then consult
Opening screen
Note
The map displayed when you first turn on the unit
will show a different area than where your vehicle is
currently located. The map display will change to
your current area once GPS positioning signals are
received.
For details (
using and press
[Warning] screen
page 31)
Select a Language