Panasonic Viera TX-P42U20E Operating Instructions Manual page 29

Menu Item
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
New Channel
Message
Signal Condition
Attenuator
Add TV Signal
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
Favourite Network
New Channel
Message
Signal Condition
Add TV Signal
Channel List
Auto Setup
Manual Tuning
Add TV Signal
●
A different menu will be displayed in the mode of SD Card. (p. 47 and p. 49)
●
Only available items can be selected.
Adjustments / Configurations (alternatives)
Creates list of favourite DVB-C channels (p. 35)
Skips the unwanted DVB-C channels or edits DVB-C channels (p. 35)
Automatically sets the DVB-C channels supplied (p. 32)
Sets the DVB-C channels manually (p. 35)
Updates DVB-C Channel List while keeping your settings (p. 34)
Selects whether to give a notification message when a new DVB-C channel is found
(Off / On) (p. 34)
Checks the DVB-C signal condition (p. 34)
Automatically reduces the DVB-C signal to avoid the interference (Off / On) (p. 34)
Adds the TV mode
●
This function is available if you skip any modes to tune in "Auto Setup" for first
using the TV.
●
To operate, refer to the "Auto Setup" operations for first using the TV (p. 12 and
p. 13).
Creates list of favourite DVB-T channels (p. 35)
Skips the unwanted DVB-T channels or edits DVB-T channels (p. 35)
Automatically sets the DVB-T channels received in the area (p. 33)
Sets the DVB-T channels manually (p. 35)
Updates DVB-T Channel List while keeping your settings (p. 34)
Selects your favourite network for each broadcasters (only available in some
countries)
Selects whether to give a notification message when a new DVB-T channel is found
(Off / On) (p. 34)
Checks the DVB-T signal condition (p. 34)
Adds the TV mode
●
This function is available if you skip any modes to tune in "Auto Setup" for first
using the TV.
●
To operate, refer to the "Auto Setup" operations for first using the TV (p. 12 and
p. 13).
Skips the unwanted Analogue channels or edits Analogue channels (p. 37)
Automatically sets the Analogue channels received in the area (p. 33)
Sets the Analogue channels manually (p. 37)
Adds the TV mode
●
This function is available if you skip any modes to tune in "Auto Setup" for first
using the TV.
●
To operate, refer to the "Auto Setup" operations for first using the TV (p. 12 and
p. 13).
29