Timer Programming - Panasonic Viera TX-P42V20E Operating Instructions Manual

Timer Programming

The Timer Programming menu allows you to choose programmes that you wish to remind watching
or record to the external recorder or the USB HDD. At the correct time, the TV will tune to the correct
channel even if the TV is in Standby mode.
TV Guide may also be used to set timer programming event
●
This function is not available in Analogue mode.
●
Timer Programming can store up to 15 events.
●
Timer Programming only works reliably if correct time information is received via the signal from the broadcaster
or service provider.
●
For recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed,
the TV must be On.
●
No other channel can be selected while the recording of Timer Programming is in progress.
●
It may not be possible to record an encrypted programme (which is copy-protected).
●
When recording programmes to the external recorder, be sure to make the proper settings on the recorder
connected to the TV.
If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 80 and p. 81)
and the "Link Settings" (p. 30) are completed, no setting of the recorder is required. Also read the manual of the
recorder.
●
If the recorder is not compatible with Q-Link, VIERA Link or similar technologies, set "Q-Link" in the Setup Menu
(p. 30) to the connected terminal (AV1 or AV2), and make timer programming of the recorder. For preparations of
a recorder, read the manual of the recorder.
●
When recording programmes to the USB HDD, be sure to register the USB HDD and enable it for recording in the
"USB HDD Setup" (p. 56).
●
Recordings are always in standard definition composite video via SCART, even if the original programme is in
high definition.
●
2 mins. before the starting time, a reminder message appears if you are watching TV.
• To remove the message and start the programming
• To cancel the programming
INPUT
TV
MENU
EXIT
abc def
ghi jkl mno
pqrs tuv wxyz
■
To return to TV
EXIT
■
To unlock the tuner
(stop recording)
EXIT
44
Timer Programming from Menu
EXIT
Select the mode you want to set
1
p. 16
TV
2 Display the menu
MENU
3 Select "Setup"
Main Menu
Picture
Sound
Setup
4 Select "Timer Programming"
Setup Menu
Timer Programming Access
Off Timer Off
USB HDD Setup
Link Settings
Child Lock
DVB-C Tuning Menu
Language
Display Settings
Common Interface
5
Set
.
(p. 21)
access
select
access
1/2
select