Accessories / Options; Installation Of The Pedestal - Panasonic Viera TH-42PY70F Operating Instructions Manual

Accessories / Options

Standard accessories
Check that you have the accessories and items shown
Remote Control Batteries for the
Transmitter Remote Control
•
N2QAYB000182 Transmitter
•
R6 (UM3)
TV
Operating Pan European
Instructions Guarantee Card
Installing remote's batteries
Pull
1
open
Hook
2
Close
Note the correct
polarity (+ or -)
Caution
•
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
•
Do not burn or breakup batteries.
Optional accessories
Wall-hanging bracket
(vertical)
TY-WK42PV3W
Caution
•
In order to maintain the unit's performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging brackets.
•
Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely sure to take
steps to prevent the TV from tipping over.
•
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product
damage.
6
Clamper Mains Lead
(2)
(2)
Pedestal (ST-42D2-WG / ST-50D2-WG)
•
TBL0E0009
(TH-42PY70FA, TH-42PY70F)
•
TBL0E0008
(TH-50PY70F)
For installation p. 7 and p. 8
Using the clamper
Rear of the TV
Remove from the TV
Snap open
Snap shut
•
Do not bundle the RF cable and mains lead together (could cause
distorted image).
•
Fix cables with clampers as necessary.
•
When using the optional accessory, follow the option's assembly
manual to fi x cables.
•
How to fi x cables when using the pedestal (standard accessory)
"Attaching the bands for fi xing cables" (p. 8)
(angle)
TY-WK42PR2W
TY-WK42PR3W

Installation of the pedestal

Warning
Do not disassemble or modify the pedestal.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
• Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
• Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest
Panasonic dealer immediately.
• During set-up, make sure that all screws are securely tightened.
If suffi cient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Use the accessory fall-prevention brackets to secure the TV. •
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal
injury may result.
Two or more people are required to install and remove the TV. •
If two or more people are not present, the TV may be dropped, and personal injury may result.
Note
•
Maintenance
Wipe the surfaces with a soft, dry cloth. If the pedestal is particularly dirty, clean it using a cloth soaked with water to
which a small amount of neutral detergent has been added, and then wipe with a dry cloth.
Do not use products such as solvents, thinner or household wax for cleaning, as they can damage the surface coating.
(If using a chemically-treated cloth, follow the instructions supplied with the cloth.)
•
Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term
contact with rubber, vinyl products or the like. (Doing so will cause deterioration.)
Assembly screw (4)
M5 × 16
■
Assembling the pedestal
Use the four assembly screws
Push both side
hooks and pull
out
Pole
( )
Align the stamped marks.
•
Forcing the assembly screws the wrong way will strip the threads.
■
Securing the TV
Use the assembly screws
•
Carry out work on a horizontal and level surface.
Attaching the pedestal
Assembly screw (4) Pole (2)
A
B
M5 × 30
to fasten the left and right poles to the base securely.
A
Pole
Pole
Front
to fasten securely.
B
View from the bottom
Arrow mark
Label
Base Band (2)
Front
Pole
( )
Align the stamped marks.
Hole for pedestal
installation
D
7