Panasonic TXP50VT60Y User Manual page 215

Functions
Turn the connected equipment on and then switch the TV on.
●
Functions
Recording does not start immediately
Check the settings of the recorder. For details, read the manual of the
●
recorder.
Parts of the TV become hot
Even if the temperature of parts of the front, top and rear panels has
●
risen, these temperature rises do not cause any problems in terms of
performance or quality.
Overcurrent error message appears
The connected USB device may cause this error. Remove the device and
●
turn the TV off with Mains power On / Off switch, then turn it on again.
Check foreign objects are not inside the USB port.
●
An error message appears
Follow the message's instructions.
●
If the problem persists, contact your local Panasonic dealer or the
●
authorised service centre.
Built-in Camera does not work
Ensure the built-in Camera is held up. When the application for camera
●
operation is activated, the built-in Camera automatically pops up.
Face recognition may not work properly depending on surrounding
●
environment or condition (for example, darkened room, etc.).
The touch pad controller does not work or cannot be registered
Are the batteries installed correctly?
●
The batteries may be running low. Replace them with new ones.
●
VIERA Link "HDAVI Control™"
VIERA Link "HDAVI Control™"
- 215 -
Summary of VIERA Link