Basic Vcr Operation -Playback - Panasonic PV-DF2004-K Operating Instructions Manual

Basic VCR Operation -Playback-

EJECT
DISPLAY
ACTION
SELECT
▲ ▼◄►
CH▲ ▼
STOP
REW/SLOW-
STILL / PAUSE
AUDIO
REC
Insert a CH STOP /
tape ▲ ▼ EJECT
If a remote control button does not work
when pressed, press the TV/VCR button
on the remote and try the button again.
Playback a Tape
1 Insert a tape.
• The unit power comes on automatically.
To prevent tape jam,
remove loose or
peeling labels from
tapes.
2 Press PLAY to play a tape.
• If tape has no record tab (see page 8), auto
play begins.
Note
• To reduce picture noise, see "Manual Tracking
Control" on page 37.
30
TV/VCR
NUMBER
keys
SET
PLAY
FF/SLOW+
SPEED
PLAY / REC REC
REPEAT Indicator
Record tab
Forward/Reverse scene search
a. Press FF/SLOW+ or REW/SLOW-.
b. Press PLAY to release.
After search has begun, each additional
press of FF or REW changes speed.
• FF and REW search speed may vary
depending on current tape position.
• After 10 minutes in search mode, unit
returns to Play mode to protect the tape
and the video heads.
Still (Freeze) picture
a. Press STILL/PAUSE.
b. Press PLAY to release.
Slow Motion picture
a. Press STILL/PAUSE.
b. Press FF/SLOW+ (increases
speed) or REW/SLOW- (decreases
speed) in Still mode.
c. Press PLAY to release.
Frame by Frame picture
a. Press STILL/PAUSE.
b. Press STILL/PAUSE in Still mode.
c. Press PLAY to release.
Notes
• These features work best in SLP mode.
• After 3 minutes in Still or Slow mode, unit stops
to protect the tape and the video heads.
Stop a Tape
Press STOP.
Rapid Rewind tape
Press REW/SLOW- in Stop mode.
Rewinds a T-120 tape in approx. 1
minute.
Rapid Fast forward tape
Press FF/SLOW+ in Stop mode.
Eject tape
Press EJECT on the remote or
STOP/EJECT on the unit.