Installing the set-in
appliance
- You need a space at least 60 cm wide.
At least 2 mm of clearance on the
sides, and 3 mm of clearance above
and behind the appliance are required
(in case you do not use the extended
water-drain hose).
- The counter above the appliance
must be firmly fixed to the adjoining
cupboards.
- You need to have the plug accessible
after installation.
Metal cover
Metal cover (AXW4595-7SR0)
Caution
Instead of the standard cover panel,
have a technician install a metal
cover.
NH-P80G1_English.indb
25
Choosing the Right Location
Levelling the appliance
Using a level helps when making of
adjustments.
To adjust the feet, use the 'A' end of the
spanner.
A
1. On each foot, loosen the lock nut by
turning it clockwise.
2. Adjust each foot by turning it
clockwise or anticlockwise.
3. Use a spirit level to make sure that
the appliance is properly levelled.
4. Tighten each lock nut by turning it
anticlockwise.
Caution
Make sure that all lock nuts are
tightened securely and the feet are
still bolted to the appliance.
If they are unbolted, the appliance will
move around.
Installation Instructions - 25
Lock nut
Foot
2012/05/31
10:34:52