Panasonic VIERA TX-26LXD6 Operating Instructions Manual page 9

QUICK START GUIDE
4
Programmes will appear immediately if your dealer has
programmed the TV for you.
If the TV has not been programmed for you then Auto setup
will begin.
The TV will search for DVB stations and Analogue stations:
TV stations will be located, sorted into order and stored ready
for use. Stations are sorted into the following order:
S DVB Stations: Are sorted by their logical channel number
sent by the broadcasters, which can be grouped into a
favourite channels list by using Profile Edit. See page 33.
SAnalogue Stations: Are sorted into channel order, but can
be changed to your preference. See page 22.
The sorted programme order depends upon the TV signal,
the broadcasting system, and reception conditions.
5
TV to VCR or DVD Recorder Download
If a "Q---Link", "NEXTVIEWLINK" or compatible recording device has been connected to a Scart ter-
minal (AV1/AV2) before starting Step 1, programme information will be downloaded to that device.
Only the analogue programme positions will be downloaded to the recording device, in the same
order as stored in the TV. See page 24.
Not all VCRs / DVD Recorders support this download of programme information, some may require to
be started manually.
Refer to the recording device's operating instruction book.
If a recording device other than those described above has been connected, then there will be no
download operation.
If the VCR (DVD/R) has not accepted download data from the TV, you may need to select the Download
D
option from the VCR (DVD/R)'s menu.
If Q---Link is not operating correctly, check it is connected to the television's AV1 or AV2 socket, the
D
SCART lead is a "full function" type, and the VCR (DVD/R) is compatible with Q---Link, NEXTVIEWLINK
or similar technologies. Ask your dealer for further details.
For further information on Q---Link and connecting equipment, see pages 39 and 44.
D
9