Panasonic VIERA TX-P42G20BA Operating Instructions Manual page 33

Menu Item
Mode
Bass
Treble
Equalizer
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance to
Wall
Preferred Multi Audio
NICAM
SPDIF Selection
MPEG Optical Level
HDMI1 / 2 / 3 / 4 Input
Audio Description
Volume
Speakers
Headphones
Reset to Defaults
●
A different menu will be displayed when "Advance(isfccc)" in the Setup Menu is set to "On" or in the mode of PC
input, Media Player or Network service operations. (p. 59 - 61, 67 - 73 and p. 82)
●
Only available items can be selected.
Adjustments / Configurations (alternatives)
Selects the basic sound mode (Music / Speech / User)
●
The selected mode affects all input signals.
Music: Improves sound quality for watching music videos, etc.
Speech: Improves sound quality for watching news, drama, etc.
●
Music and Speech modes use CONEQ™ brand equalization technology to improve
sound quality. CONEQ equalizes acoustic power frequency response and corrects
time and phase alignment errors of a speaker system. Speakers with CONEQ perform
as near-perfect electro-acoustic transducers providing true to the original sound with
the highest musically and intelligibility.
●
In Music and Speech modes, you can adjust "Bass" and "Treble" settings, and those
settings will be stored for each mode.
User: Adjusts the sounds manually by using the equalizer to suit your favourite sound quality.
●
For the User mode, "Equalizer" will appear on the Sound Menu instead of "Bass" and
"Treble". Select the "Equalizer" and adjust the frequency.
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts the frequency level to suit your favourite sound quality
●
This function is available when "Mode" is set to "User".
●
Select the frequency and change the frequency level by using the cursor button.
●
If you want to enhance the bass sound, raise the level of the lower frequency. If you
want to enhance the treble sound, raise the level of the higher frequency.
●
To reset the levels of each frequency to the default settings, select the "Reset to
Defaults" by using cursor button, and then press the OK button.
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings (Off / V-Audio / V-Audio Surround)
V-Audio: Provides a dynamic enhancer of width to simulate improved spatial effects
V-Audio Surround: Provides a dynamic enhancer of width and depth to simulate
improved spatial effects
Adjusts the volume of individual channel or input mode
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
●
If the gap between the TV and wall is over 30 cm, "Over 30cm" is recommended.
●
If the gap between the TV and wall is within 30 cm, "Up to 30cm" is recommended.
Selects the preferred language for digital channel multi audio (depending on the
broadcaster) (English / Welsh / Gaelic)
Near Instantaneous Companded Audio Multiplex
Reproduces NICAM stereo sound (Off / On)
●
Off if reception is poor (FM monaural sound)
●
Analogue mode only
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT terminal
(Auto / PCM)
Auto : Dolby Digital Plus and Dolby Digital are output as Dolby Digital Bitstream.
MPEG is output as PCM.
PCM : Digital output signal is fixed to PCM.
●
For freesat, DVB, Other Sat., Network video contents (p. 81) or Video mode (p. 70)
Adjusts the audio level of MPEG output from DIGITAL AUDIO OUT terminal as the initial
setting (0 / -2 / -4 / -6 / -8 / -10 / -12dB)
●
Normally, MPEG sound is larger comparing with the other types of audio track.
●
For freesat, DVB or Other Sat. mode
Select to fit the input signal (Digital / Analogue) (p. 96)
Digital : When sound is carried via the HDMI cable connection
Analogue : When sound is not carried via the HDMI cable connection
●
HDMI input mode only
Useful for visually-impaired viewers (Off / Auto)
Set to "Auto" to activate the description sound track if available
●
The availability of audio description sound track is indicated by "AD" in the information
banner (p. 17).
●
For freesat or DVB mode
Adjusts the volume for Audio Description
●
DVB mode only
Set to "On" to activate the description sound track from TV speakers (Off / On)
●
DVB mode only
Set to "On" to activate the description sound track from headphones (Off / On)
●
DVB mode only
Press the OK button to reset the present Sound Mode, Balance, Headphone Volume
and Surround to the default settings
"Equalizer" (below)
33