Table of Contents
Advertisement
Technical Information
HDMI (high-defi nition multimedia interface) allows you to enjoy high-defi nition digital images and high-quality sound
by connecting the TV and the equipment.
HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a set top box or a DVD player, can
be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
•
HDMI is the world's fi rst complete digital consumer AV interface complying with a non-compression standard.
•
If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable (∗2).
•
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
•
Audio settings can be made on the "HDMI1 input" menu screen. (p. 16)
•
Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
(∗1): The HDMI logo is displayed on an HDMI-compliant equipment.
Note
•
HDMI2 terminal is for digital signal only.
•
Use with a PC is not assumed.
•
The 720p/1080i signals will be reformatted before being displayed on the screen.
•
If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9".
•
These HDMI connectors are "type A".
•
An equipment having no digital output terminal may be connected to the input terminal of either "Component", "S-
VIDEO", or "Video" to receive analogue signals.
•
The HDMI input terminal can be used with only the following image signals:
480i, 480p, 576i, 576p, 720p and 1080i. Match the output setting of the digital equipment.
•
For details of the applicable HDMI signals, see p. 35.
A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.
•
PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency
59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).
•
A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector.
Note
•
Some PC models cannot be connected to this TV.
•
For details of the applicable PC signals, see p. 35.
•
Max. display resolution
Aspect
4:3
16:9
•
D-sub 15-pin connector signal
Pin No.
Signal Name
5
4
3
2
1
10
9
8
7
6
15 14 13 12 11
NC (not connected)
GND (Ground)
HDMI connections to some Panasonic equipments allow you to enjoy the easy playback or home theatre.
•
Setup the equipment to enable this function. Read the manual of the equipment.
•
This function may not work normally depending on the equipment condition.
•
This function may not work normally when Panasonic Player theatre is connected.
•
The equipment can be operated by TV's remote control with this function on even if TV is in Standby mode.
•
Image or sound may not be available for the fi rst few seconds when the playback starts.
•
Image or sound may not be available for the fi rst few seconds when Input mode is switched.
•
Volume function will be displayed when adjusting the volume of the equipment.
•
Easy playback is also available by using the remote control for Amplifi er. Read the manuals of Amplifi er.
34
HDMI connection
(∗2): Enquire at your local digital equipment retailer shop.
PC connection
Model No.
TH-42PX63EH
768 × 768 pixels
1,024 × 768 pixels
Pin No.
Signal Name
Pin No.
R
GND (Ground)
G
GND (Ground)
B
GND (Ground)
NC (not connected)
GND (Ground)
Control with HDMI
■
AV1 SCART terminal
(RGB, VIDEO)
Suitable inputs for AV1 include RGB (Red / Green / Blue).
Socket Earth
CVBS out (video)
CVBS earth
Red in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)
■
AV3 SCART terminal
(RGB, VIDEO, S-VIDEO, Q-Link)
AV3 - Pins 15 and 20 are dependent on AV3 S-VHS /
VIDEO switching.
Socket Earth
CVBS out (video)
CVBS earth
Red in, S.C. - in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)
∗ Mark: Applicable input signal for Component (Y, P
Signal name
525 (480) / 60i
525 (480) / 60p
625 (576) / 50i
625 (576) / 50p
750 (720) / 60p
Signal Name
750 (720) / 50p
NC (not connected)
1,125 (1,080) / 60i
NC (not connected)
1,125 (1,080) / 50i
HD/SYNC
640 × 400 @70 Hz
VD
640 × 480 @60 Hz
NC (not connected)
640 × 480 @75 Hz
800 × 600 @60 Hz
800 × 600 @75 Hz
800 × 600 @85 Hz
1,024 × 768 @60 Hz
1,024 × 768 @70 Hz
1,024 × 768 @75 Hz
1,024 × 768 @85 Hz
1,280 × 1,024 @60 Hz
Macintosh13" (640 × 480)
Macintosh16" (832 × 624)
Macintosh21" (1,152 × 870)
•
Note
•
SCART and S-video terminal information
■
AV2 SCART terminal
(VIDEO, S-VIDEO, Q-Link)
AV2 - Pins 15 and 20 are dependent on AV2 S-VHS /
VIDEO switching.
21
Socket Earth
20
CVBS in (video)
19
CVBS out (video)
18
RGB status earth
17
CVBS earth
16
Status RGB
15
S.C. - in
14
Earth
13
Earth
12
--
11
--
10
--
9
Earth
8
Status CVBS
7
--
6
Audio in (L)
5
Earth
4
Audio earth
3
Audio out (L)
2
Audio in (R)
1
Audio out (R)
■
AV4 S-VIDEO 4 pin terminal
Chrominance in
21
20
CVBS in (video)
19
18
RGB status earth
17
16
Status RGB
15
14
Earth
13
12
--
Chrominance earth
11
10
Q-Link data
9
8
Status CVBS
7
6
Audio in (L)
5
4
Audio earth
3
2
Audio in (R)
1
Input signal that can be displayed
, P
), HDMI and PC (D-sub 15P)
B
R
Horizontal
Vertical
frequency (kHz)
frequency (Hz)
15.73
59.94
31.47
59.94
15.63
50.00
31.25
50.00
45.00
60.00
37.50
50.00
33.75
60.00
28.13
50.00
31.46
70.07
31.47
59.94
37.50
75.00
37.88
60.32
46.88
75.00
53.67
85.06
48.36
60.00
56.48
70.07
60.02
75.03
68.68
85.00
63.98
60.02
35.00
66.67
49.72
74.54
68.68
75.06
Signals other than above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
21
20
CVBS in (video)
19
18
Earth
17
16
--
15
14
Earth
13
12
--
11
10
Q-Link data
9
8
Status CVBS
7
6
Audio in (L)
5
4
Audio earth
3
2
Audio in (R)
1
Luminance in
Luminance earth
Component
HDMI
PC
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
35
Hide quick links:
Advertisement
Table of Contents
