Multi Shot 3D
This TV can create a 3D photo using a pair of photos in the SD Card and
save it into the same SD Card.
This TV can also create a 3D photo from photos in the USB Flash Memory,
●
but cannot save it.
This function is available with photos recorded on digital cameras.
●
Depending on the photos you select, they may not be suitable for creating
●
3D photos, or creating 3D photos may not be possible. In this case, it is
recommended to take a photo (for L) and then move your camera to the
right approx. 5 cm and take another photo (for R).
To view the created 3D photo with 3D effect, you need the 3D Eyewear.
●
1. Display the option menu in the thumbnail view with
2. Select
Multi Shot 3D
3. Select two photos for L (left) and R (right) with
(red)
You can only select photos of the same recorded date and the same
●
pixels.
You may not be able to view the created 3D photo properly if you select
●
photos for L and R in reverse.
4. Create the 3D photo with
If your selected photos are not suitable for the 3D photo, the error
●
message will be displayed and you will return to the photo selection
screen (step 3).
To save the 3D photo in the SD Card, press
●
screen instructions.
After the photo is saved, the photo selection screen will be displayed
●
(step 3). Select photos again to create another 3D photo or exit from
Multi Shot 3D
■
To enjoy the saved 3D photos
Saved 3D photos are displayed in the thumbnail view. Wear the 3D Eyewear
and enjoy the 3D photos.
Using slideshow
Slideshow ends when all photos within the current thumbnail are viewed.
1. Select the file from the thumbnail of photos for the first view with
/
2. Start Slideshow with
with
/
and press
OK
mode.
(red) and
OK
- 92 -
OPTION
OK
to access
/
/
/
and
OK
and follow the on-
/
/